dragonlee Posted January 11, 2018 Author Share Posted January 11, 2018 I’ve been receiving messages via phone if this will be for sale. No atm until further notice..lol..maybe one day. Yes it does fire up... Link to comment Share on other sites More sharing options...
dragonlee Posted February 1, 2018 Author Share Posted February 1, 2018 Stocktake Doing a stocktake atm on monitors of what I have found so far in 29”..lol Link to comment Share on other sites More sharing options...
dragonlee Posted February 4, 2018 Author Share Posted February 4, 2018 Baby Pacman restored Baby Pacman fully Led and Working.. All I need to do is put the T-molding which will take minimal time.. Another dedicated machine added to my collection.. Next restores will be 2 Astro City which I’m working on atm and A dedicated Gyruss. Link to comment Share on other sites More sharing options...
dragonlee Posted February 10, 2018 Author Share Posted February 10, 2018 Candy cabs Working on these atm.I have another 3 to go after this...:lol Link to comment Share on other sites More sharing options...
Autosteve Posted February 10, 2018 Share Posted February 10, 2018 That is a nice job you are doing on those actually the one you have finished is beautiful. Link to comment Share on other sites More sharing options...
gingerbreadman Posted February 13, 2018 Share Posted February 13, 2018 Dragon lee helped me out with some spares a few years back . Legend Link to comment Share on other sites More sharing options...
Laxity Posted February 16, 2018 Share Posted February 16, 2018 How did the Megalo 410 turn out with an LCD? Anything you can share from the experience? Got any cool photos? I've got two and i'm still thinking i'll try to fit Short Throws and keep them projection. Link to comment Share on other sites More sharing options...
gsr Posted February 16, 2018 Share Posted February 16, 2018 Working on these atm.I have another 3 to go after this...:lol how much do you sell those for working? Link to comment Share on other sites More sharing options...
dragonlee Posted February 17, 2018 Author Share Posted February 17, 2018 Re-shuffled one the gaming rooms. Totally re-shuffled the middle gaming room. Candy cabs been set up to be restored atm.. Link to comment Share on other sites More sharing options...
dragonlee Posted February 17, 2018 Author Share Posted February 17, 2018 how much do you sell those for working? What are you after ? I have 9 candy cabs up in Qld amongst my relatives whom got them in there collection.. Prices start from $1300 upwards..They are all high end candy cabs.. Link to comment Share on other sites More sharing options...
dragonlee Posted February 18, 2018 Author Share Posted February 18, 2018 Another Sega Astro City restored. 90% completed. Side art and instruction to finish it off.... Also a Egret 2 fully restored too...:p Link to comment Share on other sites More sharing options...
dragonlee Posted February 20, 2018 Author Share Posted February 20, 2018 New Astro City and Astro City added to the For Sale shed in the near future... Link to comment Share on other sites More sharing options...
dragonlee Posted February 25, 2018 Author Share Posted February 25, 2018 Last restore im doing for awhile atm...Taking a break from the hobby due to house renovations... Picked up another Megalo 410 with a stuffed rear projector which converting to LCD or installing a spare 29"Crt monitor i have in stock. Link to comment Share on other sites More sharing options...
Laxity Posted February 26, 2018 Share Posted February 26, 2018 Keen to see what you do with this one. Have you found any manuals on the 410 you could share? Link to comment Share on other sites More sharing options...
dragonlee Posted March 7, 2018 Author Share Posted March 7, 2018 Shmup Candy cabs Ready for sale in the near future.. Link to comment Share on other sites More sharing options...
dragonlee Posted March 13, 2018 Author Share Posted March 13, 2018 Bally Midway Another project on working Atm. Link to comment Share on other sites More sharing options...
dragonlee Posted March 14, 2018 Author Share Posted March 14, 2018 Projects Couple projects I’m working on atm. Gorf by Midway Defender by Taito Link to comment Share on other sites More sharing options...
dragonlee Posted March 14, 2018 Author Share Posted March 14, 2018 Red Defender Arrived yesterday around 4 pm from Adelaide thanks to @Bet7676. Totally gutted the cabinet and installed a new jamma harness and arcade PSU. I had a control panel for it which I’ve overhauled with new customized overlay and joysticks/button. Monitors works perfectly. Installed new side decal and Taito sticker next the speaker. Cabinet does have wear and tear due to its age. Only thing I need to do is install a new flouro and a starter. It will be for sale in the near future but if interested Atm just pm me.lol Link to comment Share on other sites More sharing options...
Autosteve Posted March 14, 2018 Share Posted March 14, 2018 Nice cab sir. New PS and jamma harness excellent. As for the fluro I think it is hard to beat twin low wattage CFL bulbs. One will do but two have better light spread more like a fluro. I have an original Taito fluro panel with tombstones, ballast and starter if you need it but the reason I have it is because I did the above myself as the type of starter required is critical with the standard fluro setup. Unfortunately that is not my signature on the title plate so not one I personally assembled.:cry Link to comment Share on other sites More sharing options...
dragonlee Posted March 15, 2018 Author Share Posted March 15, 2018 Nice cab sir. New PS and jamma harness excellent. As for the fluro I think it is hard to beat twin low wattage CFL bulbs. One will do but two have better light spread more like a fluro. I have an original Taito fluro panel with tombstones, ballast and starter if you need it but the reason I have it is because I did the above myself as the type of starter required is critical with the standard fluro setup. Unfortunately that is not my signature on the title plate so not one I personally assembled.:cry I have three blank plates which I’m waiting on overlays. Ive kept the original Taito flouro in there which Ive run out of flouro tubes and starter but I will install later on when I get the chance to buy them today sometime. Link to comment Share on other sites More sharing options...
dragonlee Posted March 16, 2018 Author Share Posted March 16, 2018 Gorf by Midway Project restoration. Classic arcade machine. Internal complete. All boards been tested and working now. Fired up and can play the game blind due to no video signal picture on monitor. Checked all the wiring from the Rgb interface board to game board which was the issue. Cleaned the connection plug and bingo the game fired up on the screen. Only issue is missing red color but there’s is write up of how to fix it which I will do in the near future. All I need to track down some standard 120v screw in household globes to finish off the project. Link to comment Share on other sites More sharing options...
dragonlee Posted March 17, 2018 Author Share Posted March 17, 2018 Update: Fixed the red color on the Rgb interface baord connecting to the main board. Link to comment Share on other sites More sharing options...
dragonlee Posted March 18, 2018 Author Share Posted March 18, 2018 Space invaders deluxe by Midway Another project I’ve started. Cabinet is in good condition for its age. Completely gutted the internal wiring and parts. Removed the original b&w monitor and installed a kirbside tv that I had while I was hoarding them with a Universal Jomac Chassis. New psu/jamma harness installed. Installed a 60-1 pcb board to boot only to Space Invaders for now. Need to convert the flouro ballast from 120v to 240v.Only one to light up the back for the half moon. Complete overhauled the internal with new parts. Last thing I need to do is the control panel with a new overlay which will complete the project. Link to comment Share on other sites More sharing options...
dragonlee Posted March 19, 2018 Author Share Posted March 19, 2018 Update.. SI deluxe fully functional Link to comment Share on other sites More sharing options...
dragonlee Posted April 10, 2018 Author Share Posted April 10, 2018 Frogger and Space Duel Restore in progress. As per title say.. working on another imported cabs atm. Officially I will be off the grid for awhile of restoring the imports. Booked my last arcade Restore for aa member in Melbourne which is next weekend. Need to concentrate on my restoration of my import cabinet. here some pictures of the two cabs. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now