Thanks Thanks:  0
Results 1 to 1 of 1

Thread: Taito Space Invaders PCB Repair Log - GG

  1. #1

    Join Date
    Jun 2008
    State
    Brisbane, QLD
    Posts
    2,439
    Mentioned
    237 Post(s)
    Quoted
    482 Post(s)
    Australia

    Taito Space Invaders PCB Repair Log - GG

    GG#2

    I got sent three Taito L-Shaped PCB's to look at for another member.
    I labeled this one GG#2 to keep track of which is which.

    The board was in fair condition but was booting to garbage and resetting.



    I pulled the ROMs to check if they were good and one had a few legs broken (Ceramic chip with gold pins) another checked bad and the other two were okay but had tarnished pins.
    A new set was burnt, they were Space Invaders Part 4 (invader4) so the same rom set was burnt, this is the version with fast shoot, the invaders occasionally split when you shoot them and the UFO shoots at you.



    The sockets were pretty average, one had heavy oxidation on a couple of pins and the rest weren't the best either.



    They were all replaced.

    After powering it up there were still some graphics issues and resetting so I threw a Test ROM in and it reported that one of the RAMs were bad.



    After replacing the suspect RAM the board now boots to a normal screen.



    A few games were played and after about a minute there's usually a graphics corruption followed by a reset.

    That's enough for today, I'll get back to it in the next few days.
    Last edited by Kaizen; 1 Week Ago at 09:13 PM.
    Namco Starblade - Taito Cocktail 14" x 3, 20" x 2 - NZ SI PtII Upright - Chase HQ DX, Taito Top Speed - Taito Grand Champion - Taito Safari - LAI SI Head to Head Cocktail - SI Cocktail Clone x 2, Pong Clone x 3

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Taito Space Invaders L shaped Taito upright
    By tevo in forum Arcade Technical and Repair Questions
    Replies: 12
    Last Post: 4 Weeks Ago, 04:17 PM
  2. Key help for Taito Space Invaders
    By Darthlaker in forum Arcade Technical and Repair Questions
    Replies: 2
    Last Post: 12th July 2013, 07:12 PM
  3. Taito Space invaders
    By jaydageezer in forum Arcade Machine Restoration Questions and Help
    Replies: 24
    Last Post: 28th May 2013, 09:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •