lobsterboi Posted November 7, 2018 Share Posted November 7, 2018 Hi All, I’ve been chasing a Namco Noir for a while now to go with my two Exceleena’s. I picked up one locally, but requires a bit of work. Control Panel need replacing frame needs powder coating and the rest of the cabinet needs a good clean and polish. Parts required: Control Panel – Ordered Operation Panel Character Move bracket Character Move Sheet Locks Marquee Holder Link to comment Share on other sites More sharing options...
lobsterboi Posted November 8, 2018 Author Share Posted November 8, 2018 Started to disassemble the cab Has a crazy amount of dust and dirt and old soft drink throughout. CP frame sand blasted and off to powder coaters. Link to comment Share on other sites More sharing options...
lobsterboi Posted November 10, 2018 Author Share Posted November 10, 2018 Speakers and speaker panels cleaned an polished Someone has cut a hole in the operational panel, I need to get this fixed, does anyone know the centre location and diameter of the hole for the coin reject button which will then need to be drilled? Link to comment Share on other sites More sharing options...
Jumpingmanjim Posted November 10, 2018 Share Posted November 10, 2018 Did the motherboard still work? Link to comment Share on other sites More sharing options...
lobsterboi Posted November 10, 2018 Author Share Posted November 10, 2018 (edited) Yeah it all worked, just the dust but cleaned up well EDIT: There is a red flashing light next to the blue light at the DC In connector, anyone know how to troubleshoot it or know causes? Edited November 11, 2018 by lobsterboi Link to comment Share on other sites More sharing options...
lobsterboi Posted November 13, 2018 Author Share Posted November 13, 2018 Control panel arrived today and installed in frame after powder coating. Link to comment Share on other sites More sharing options...
mR_CaESaR Posted November 21, 2018 Share Posted November 21, 2018 This is looking mint! Where did you order the CP from? Direct from Namco? Link to comment Share on other sites More sharing options...
lobsterboi Posted November 22, 2018 Author Share Posted November 22, 2018 Thanks, I got it from https://www.arcadespareparts.com/ wasn't cheap but looks great having a new CP. Link to comment Share on other sites More sharing options...
OsirusANZ Posted March 23, 2019 Share Posted March 23, 2019 You got photos of this beast completed with marquee yet?? Sent from my iPhone using Aussie Arcade Link to comment Share on other sites More sharing options...
lobsterboi Posted March 24, 2019 Author Share Posted March 24, 2019 You got photos of this beast completed with marquee yet?? Sent from my iPhone using Aussie Arcade Nah not yet, the marquee came from a different system so need to do some modification to get it mounted to the cabinet. I picked up a poster from YAJ the other day which should fit nicely in it. Link to comment Share on other sites More sharing options...
namastepat Posted March 24, 2019 Share Posted March 24, 2019 @lobsterboi what marquee holder do you have? I bought one from a seller recently who thought his was a Lindbergh marquee. It's not a Lindbergh marquee and I think it might be a Noir marquee. I was going to retrofit it to my Lindbergh, but if your one ends up being a Lindbergh marquee, I'd happily arrange a trade. Link to comment Share on other sites More sharing options...
lobsterboi Posted March 25, 2019 Author Share Posted March 25, 2019 @lobsterboi what marquee holder do you have? I bought one from a seller recently who thought his was a Lindbergh marquee. It's not a Lindbergh marquee and I think it might be a Noir marquee. I was going to retrofit it to my Lindbergh, but if your one ends up being a Lindbergh marquee, I'd happily arrange a trade. The one i got is from a killer cab similar to picture below, looks like a Noir clone but holes don't line up. I have a Lindbergh and checked as well and it doesn't line up with that either :-( Interested to know your thoughts on how to retrofit it. Link to comment Share on other sites More sharing options...
1.21 Gigawatts Posted September 11, 2019 Share Posted September 11, 2019 (edited) @lobsterboi is this the machine that’s for sale but with a 1P CP? Edited September 11, 2019 by 1.21 Gigawatts Link to comment Share on other sites More sharing options...
lobsterboi Posted September 11, 2019 Author Share Posted September 11, 2019 Yeah mate the same one, its sold pending pickup. Link to comment Share on other sites More sharing options...
1.21 Gigawatts Posted September 12, 2019 Share Posted September 12, 2019 Yeah mate the same one, its sold pending pickup. Thanks. I was hemmin and hawing about it. Is the Lindbergh next? :cool: Link to comment Share on other sites More sharing options...
lobsterboi Posted September 12, 2019 Author Share Posted September 12, 2019 Hahah yes it is, interested? Sent from my iPhone using Aussie Arcade Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now