Jump to content
Due to a large amount of spamers, accounts will now have to be approved by the Admins so please be patient. ×
IGNORED

Red & Ted's Roadshow Fully Refurbished


Recommended Posts

$7500

Red & Teds Roadshow fully rebuilt and in excellent condition.

Featured in last years ACT Pinball Championships in the Pin Golf Comp and played flawlessly.

Over $2000 in new parts throughout the game.

Playfield completely stripped, cleaned, waxed, fish decal installed, shooter lanes clear coated, & polycarbonate playfield protector installed.

Full flipper rebuild kit installed. I've now added some flipper bat toppers for it.

High polished carbon balls.

Heads completely rebuilt with a heap of new internal parts & gears, new back of Ted's head, faces touched up and clear coated.

All plastics cleaned and full plastic protector kit installed.

All ramps cleaned and repaired.

All ball trails removed from metal ball guides and polished.

Mirror blades installed.

Custom coloured Comet LEDs through out the entire playfield.

Custom coloured Superbands installed through out the playfield

Nearly every plastic post replaced and custom coloured.

All plastic sub troughs cleaned.

All metal sub troughs cleaned, ball trails removed (where possible) and polished.

Any damaged weldments repaired.

Every single spring, rubber and coil sleeve has been replaced top to bottom.

Playfield inserts cleaned.

Inside of cabinet has been cleaned.

Outside of cabinet has had some minor repairs and is in excellent condition.

Coin door repainted and clear coated.

All new gold leg levelers & bolts, nylon washers and felt cabinet protectors installed.

Legs are in excellent to new condition.

Backbox has been cleaned and has full Comet & Cointaker LEDs.

Translite in good condition, a couple of minor marks but are not very noticeable.

Topper installed.

Rottendog MPU

Remote battery pack installed.

Shaker motor works strong.

DMD works perfectly.

Custom hand painted radio and clear coated.

New shooter rods and springs.

Cliffy protector sets for both Start City, Blast Hole and rollover switches not that they are needed due to the polycarbonate playfield protector.

Led bumper caps installed.

Purple pop bumper cap installed.

Pop bumpers fully cleaned and rebuilt.

All switches adjusted.

Spotlights added to slingshots.

Backboard decal installed.

2 different sets of laminated apron cards.

Laminated Target Decals plus loads of spares.

Manual in binder.

You can see heaps of pictures of it on my Facebook page OCD Pinball Australia https://www.facebook.com/BlingYourPin/?ref=bookmarks

Located in the Southside of the ACT

[ATTACH=CONFIG]119856[/ATTACH]

[ATTACH=CONFIG]119857[/ATTACH]

[ATTACH=CONFIG]119858[/ATTACH]

[ATTACH=CONFIG]119859[/ATTACH]

[ATTACH=CONFIG]119860[/ATTACH]

[ATTACH=CONFIG]119861[/ATTACH]

[ATTACH=CONFIG]119862[/ATTACH]

[ATTACH=CONFIG]119863[/ATTACH]

[ATTACH=CONFIG]119864[/ATTACH]

[ATTACH=CONFIG]119868[/ATTACH]

[ATTACH=CONFIG]119869[/ATTACH]

[ATTACH=CONFIG]119870[/ATTACH]

[ATTACH=CONFIG]119871[/ATTACH]

[ATTACH=CONFIG]119872[/ATTACH]

[ATTACH=CONFIG]119873[/ATTACH]

[ATTACH=CONFIG]119874[/ATTACH]

[ATTACH=CONFIG]119879[/ATTACH]

[ATTACH=CONFIG]119880[/ATTACH]

[ATTACH=CONFIG]119881[/ATTACH]

[ATTACH=CONFIG]119882[/ATTACH]

[ATTACH=CONFIG]119883[/ATTACH]

[ATTACH=CONFIG]119884[/ATTACH]

[ATTACH=CONFIG]119885[/ATTACH]

Edited by Sladethicax
Link to comment
Share on other sites

  • 2 weeks later...
$6400

Refurbished Red & Teds Roadshow

Featured at this years ACT Pinball Championships in the Pin Golf Comp and played flawlessly.

Over $2000 in new parts throughout the game.

Playfield completely stripped, cleaned, waxed, fish decal installed, shooter lanes clear coated, & polycarbonate playfield protector installed.

Full flipper rebuild kit installed.

High polished carbon balls.

Heads completely rebuilt with a heap on new internal parts & gears, touched up and clear coated.

All plastics cleaned with Novus and protectors installed.

All ramps cleaned with Novus and repaired.

All ball trails removed and metals polished.

Mirror blades installed.

Custom coloured Comet LEDs through out the entire game.

Custom coloured Superbands installed through out the playfield

Nearly every plastic post replaced and custom coloured.

All plastic sub troughs cleaned with Novus.

All metal sub troughs cleaned, ball trails removed (where possible) and polished.

All weldments repaired.

Every single spring, rubber and coil sleeve has been replaced through out the entire game.

Playfield inserts cleaned.

Inside of cabinet has been cleaned.

Outside of cabinet had some minor repairs and is in excellent condition.

Coin door repainted and clear coated.

Gold leg levelers & bolts, nylon washers and felt cabinet protectors installed.

Legs are in excellent to new condition.

Backbox has been cleaned and has full Comet or Cointaker LEDs.

Translite in good condition (a couple of minor makes but are not very noticeable.

Topper installed.

Rottendog MPU

Remote battery pack & batteries installed.

Shaker motor works strong.

DMD works perfectly.

Custom hand painted radio and clear coated.

New shooter rods and springs.

Cliffy protector sets for both Start City, Blast Hole and rollover switches not that they are needed due to the polycarbonate playfield protector.

Led bumper caps installed.

Purple pop bumper cap installed.

Pop bumpers fully cleaned and rebuilt.

All switches adjusted.

Spotlights added to slingshots.

Backboard decal installed.

2 sets of laminated apron cards.

Laminated Target Decals plus loads of spares.

Manual in binder.

You can see heaps of pictures of it on my Facebook page OCD Pinball Australia https://www.facebook.com/BlingYourPin/?ref=bookmarks

I will add some new pictures soon on this site as well.

[ATTACH=CONFIG]119856[/ATTACH]

[ATTACH=CONFIG]119857[/ATTACH]

[ATTACH=CONFIG]119858[/ATTACH]

[ATTACH=CONFIG]119859[/ATTACH]

[ATTACH=CONFIG]119860[/ATTACH]

[ATTACH=CONFIG]119861[/ATTACH]

[ATTACH=CONFIG]119862[/ATTACH]

[ATTACH=CONFIG]119863[/ATTACH]

[ATTACH=CONFIG]119864[/ATTACH]

[ATTACH=CONFIG]119868[/ATTACH]

[ATTACH=CONFIG]119869[/ATTACH]

[ATTACH=CONFIG]119870[/ATTACH]

[ATTACH=CONFIG]119871[/ATTACH]

[ATTACH=CONFIG]119872[/ATTACH]

[ATTACH=CONFIG]119873[/ATTACH]

[ATTACH=CONFIG]119874[/ATTACH]

[ATTACH=CONFIG]119879[/ATTACH]

[ATTACH=CONFIG]119880[/ATTACH]

[ATTACH=CONFIG]119881[/ATTACH]

[ATTACH=CONFIG]119882[/ATTACH]

[ATTACH=CONFIG]119883[/ATTACH]

[ATTACH=CONFIG]119884[/ATTACH]

[ATTACH=CONFIG]119885[/ATTACH]

GLWS! The clear coat on the heads make them look like they're sweating! [emoji23] Understandable given the current weather in Vic!

 

Sent from my Nexus 6P using Tapatalk

Link to comment
Share on other sites

  • 4 months later...
  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...