Jump to content
Due to a large amount of spamers, accounts will now have to be approved by the Admins so please be patient. ×
IGNORED

Gottlieb SYS 80 spare parts.UPDATE post #7


Recommended Posts

Gday guys

I have to offer Gottlieb Sys 80 spare parts which i stripped the MGoW.

Sold as is...

1.Sys 80 power/transformer board complete in tact to the factory mdf board.(Needs a clean)Fires up when last tested in the cabinet..$130

2.Set of Gottlieb 5 display unit(4x6 digit and 1 x4 digit)Untested $100..Sold pending

3.Power supply board Untested $10..Sold

4.Populated wide body play field for parts including the wiring loom only $170..SOLD

Item 2 and 3 cab shipped for a extra cost.

Item 1 and 2 Local pick up or can be packed and shipped via Prowler for interstate buyers.

Please note its ex container pin so therefore all parts SOLD AS IS..

Any question feel free to ask.

I will be adding more parts to this thread later on.(Gottlieb coin door,legs,side rail and lock down bar including mechanism)

Cheers

Dragonlee

Edited by dragonlee
Link to comment
Share on other sites

Spare parts

 

More parts added..

Sold as is

Wide body lock down bar with the mechanism $65 for the set plus postage.SOLD pending

Gottlieb Coin door $50 plus postage

Wide body pinball glass $40 Pick up only

Set of side rails $40 for the pair plus postage

Price adjustment for playfield and psu/transformer

Edited by dragonlee
Link to comment
Share on other sites

66cm

 

Thanks, is that the length of the lock down bar or the part that it fits into? If the lock down bar itself is 66cm long, then it should be the same.

 

- - - Updated - - -

 

I'm after the part circled below. Could you please measure the distances marked "A" and "B"? On my game "A" is 26.5cm and "B" is 14.5cm. If yours is the same, I'll come and pick it up, I'm also in Melbourne.

 

1264866000_BHlockdownbarreceiver.thumb.jpg.985a4c5a85869d12d0c38259f2df5e25.jpg

 

Thanks

Link to comment
Share on other sites

Thanks, is that the length of the lock down bar or the part that it fits into?

 

- - - Updated - - -

 

I'm after the part circled below. Could you please measure the distances marked "A" and "B"? On my game "A" is 26.5cm and "B" is 14.5cm. If yours is the same, I'll come and pick it up, I'm also in Melbourne.

 

[ATTACH=CONFIG]115910[/ATTACH]

 

Thanks

Exact measurement for A and B that you have quoted...

 

- - - Updated - - -

 

Added another item..

Check post #7

Set of side rails

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...