Koops Posted September 6, 2017 Share Posted September 6, 2017 (edited) Not looking to get rid of this unless I can get something good to replace it. Probably a long shot but I'll looking for pins of the nicer/higher end stern variety (ironman/tron le/stle etc) so trade + cash in either direction as applicable. If there is no interest or suitable trade that's fine I can just keep it ;) Pin Details (most taken from the original for sale thread :) ) Ron Kruzman restored playfield ~ 2009. Playfield was delivered to Australia and restoration was performed here. Cabinet has been restored inside and out with new decals fitted and not a mark on them. Felt protectors installed from day 1. No damage underneath. Fully blacked out interior as per restoration from that era. (we get used to the sanded raw cabinet floors now). Boards were all serviced at the time. Fully rebuilt clock with Ingo board installed. Remote battery pack installed. New plastics set. New flipper bats. New flipper superbands. All Ramps rechromed. New coin door. New Dr Pinball colour DMD. (Note this is not a full colour DMD but has a fully programable 4 colour option) 3 Rebuilt flipper kits installed. PDI target decal set Titan superbands through out and all new coloured Cliffy posts. Gum ball and slot machine cliffys fitted. New high gloss chrome legs New high gloss chrome leg bolts. New nylon bolt protectors. Inlane Cliffy fitted and small Mylar for the drop from slot machine ramp. There was some cracks to the clearcoating there that was not declared when I bought machine. New LEDs throughout machine including the backbox Mirrorblades Piano mod Car mod Light up gum ball mod Camera mod Robbie the robot mod TV mod Slot machine mod New decals over lamp and diverter New coin door decal kahl wpc powerfix board I can't take photos of the sides from where the machine is installed right now but here are some from the previous owner. I can take the machine out of the line and take new ones if it is really required. Edited October 7, 2017 by Koops Link to comment Share on other sites More sharing options...
JOKERPOKER Posted September 6, 2017 Share Posted September 6, 2017 Playfield in this has to be seen to believe just how smooth and thick this clearcoating is. 2K in the playfield alone to get it here from the states now. Ron Kruzman is one of the top 5 restorers in the states. Such a great example of a TZ. Mods galore. GLWS or trade. Link to comment Share on other sites More sharing options...
balls Posted September 6, 2017 Share Posted September 6, 2017 Looks nice & shiny, Pity I already have one. GLWTS chaps!! Link to comment Share on other sites More sharing options...
vintage Posted September 6, 2017 Share Posted September 6, 2017 Is that Gottlieb sign on the wall a repro? Link to comment Share on other sites More sharing options...
JOKERPOKER Posted September 6, 2017 Share Posted September 6, 2017 Is that Gottlieb sign on the wall a repro? It's from Pinball Resource. PBR http://pbresource.com/images/gotsignf.jpg Link to comment Share on other sites More sharing options...
aulantern Posted September 6, 2017 Share Posted September 6, 2017 Wow!! Fantastic looking machine!!.. Best of luck Link to comment Share on other sites More sharing options...
Coon82 Posted September 6, 2017 Share Posted September 6, 2017 That is one of the nicest looking Twilights I've seen. GLWTT Link to comment Share on other sites More sharing options...
ddstoys Posted September 6, 2017 Share Posted September 6, 2017 It's from Pinball Resource. PBR http://pbresource.com/images/gotsignf.jpg Found this in a schematic the other week Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Koops Posted September 6, 2017 Author Share Posted September 6, 2017 Is that the original reason toppers were made? To stop people's drinks from falling on the glass? Link to comment Share on other sites More sharing options...
Railways Posted September 6, 2017 Share Posted September 6, 2017 Gotta say that has to be the nicest looking TZ I've seen. Makes me wish I'd kept my barn find one and spent the same amount of time on it, nice job:( Link to comment Share on other sites More sharing options...
Koops Posted September 6, 2017 Author Share Posted September 6, 2017 Playfield in this has to be seen to believe just how smooth and thick this clearcoating is. 2K in the playfield alone to get it here from the states now. You're not wrong. I asked about him doing a playfield for me and it was more than 50% of the cost of the machine! Link to comment Share on other sites More sharing options...
Tastysirloin Posted September 10, 2017 Share Posted September 10, 2017 Bump Bump for one real nice TZ :cool: and that KRUZMAN playfield puts the icing on the top . GLWS. Link to comment Share on other sites More sharing options...
MrMaloo Posted September 10, 2017 Share Posted September 10, 2017 Very nice looking TZ there @Koops . Always wanted one of these in my collection . Had a nice Gunners a short while back that I could have traded but was bought by some out-of-towner ... :D Link to comment Share on other sites More sharing options...
Koops Posted September 10, 2017 Author Share Posted September 10, 2017 Very nice looking TZ there @Koops . Always wanted one of these in my collection . Had a nice Gunners a short while back that I could have traded but was bought by some out-of-towner ... :D *mexicans ;) The tz may be coming north anyway! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now