Results 1 to 4 of 4

Thread: Data I/O 29B Resource

  1. #1
    Join Date
    Oct 2005
    State
    Redlands
    Posts
    19,436
    Mentioned
    173 Post(s)
    Quoted
    2030 Post(s)

    Data I/O 29B Resource

    Going to start compiling useful information on running these things.

    Useful Links.

    Pictures and a heap of manuals plus device lists.
    http://www.pestingers.net/Data_IO_29B.htm

    Memory upgrade guide
    Software
    Info on making a serial cable
    Device list
    http://retroclinic.com/leopardcats/dio/dataio29b.htm

    Software
    http://mikesarcade.com/arcade/promlink.html

    Data I/O 29B Proms dumped and documented by Johns Arcade (cheers mate)
    Download HERE
    Last edited by Arcade King; 3rd August 2008 at 10:36 PM.

  2. #2
    Join Date
    Oct 2005
    State
    Redlands
    Posts
    19,436
    Mentioned
    173 Post(s)
    Quoted
    2030 Post(s)

    Updated.

    Data I/O 29B Proms and documentation about them has been donated by Johns Arcade

  3. #3
    Join Date
    Dec 2013
    State
    Christchruch
    Posts
    63
    Mentioned
    3 Post(s)
    Quoted
    14 Post(s)
    Thanks now if I could just get mine to talk to the PC then I am on my way.

  4. #4
    Join Date
    Dec 2013
    State
    Christchruch
    Posts
    63
    Mentioned
    3 Post(s)
    Quoted
    14 Post(s)
    After spending time to get the Data I/O 29B programmer working I thought this may help the next person.

    Just like to add a note that the programmer I have here is an older version firmware etc. Type "select", "B","2", "start" to display memory and firmware version. Mine is a 128k unit with V4 firmware.

    The older version uses a 4 digit family and pin-out code not the 6 digit like the later firmware version.

    To get mine to work with a late model PC took some effort but it can be made to work, The version of PROMlink provided by Mikesarcade is required, the cable made as per retroclinic information, also needs to constructed.

    The setting needed to get it to communicate took some time to sort so heres how to make it easier for the next person.

    The "Status Switch" under the Unipac or logicPak etc should be set to sw 1 off, sw2 off, sw3 on, sw4 off. So this set it up to Parity odd, Parity off, Stop bits 1, CRC normal.

    Baud Rate on the back set to switch position 14 or E for 9600

    Next set up PROMlink

    In the options menu select programmer type in my case 29B UniPak,

    Next Programmer port set options to COM1, Baud rate 9600, Parity none, Data Bits 8, Stop Bits 1

    Last Terminal emulation again in my case “29unipak.dev” was selected.

    And the last step get is to get the programmer into Remote Mode, this is done by entering “Select”, “F”, “1” , “Start”, “Start”. If all has worked out the programmer should be displaying Remote Mode
    and if you set a device type from PROMlink then the programmer should now be able to perform functions like “Blank Check” etc.

    To save the ROM's data you will need to use "Absolute Binary" when selecting to I/O Format this should be option 16 in the menu. The save option is found in the Data menu "Create File from Ram". Once saved the bin file should be able to read and check summed as per normal Checksum-16 format.

    I am using an older laptop Dell Latitude D830 Core2 Duo with XP Sp3 as the operating system. PROMlink is not required to run in any special way so should just operate from the the .exe as normal. The older Dell does still have the RS232 port so I have not needed to try using a USB to RS adapter.

    Grant

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Pinball Manuals For All !!!
    By Berty in forum Pinball
    Replies: 39
    Last Post: 10th August 2017, 01:43 PM
  2. Data I/O 29B
    By dav000616 in forum PCB and Monitor Repair logs
    Replies: 13
    Last Post: 15th June 2008, 07:35 AM
  3. Data East Jurassic Park Restore
    By Strangeways in forum DMD (Dot Matrix display) Pinball Restorations
    Replies: 21
    Last Post: 5th November 2007, 09:05 PM
  4. Projectors and Screens
    By WOKA in forum General Chat
    Replies: 32
    Last Post: 4th September 2007, 11:45 AM
  5. Yes, Laserdisc Support is Coming: Mame
    By The Pinny Parlour in forum M.A.M.E, Computer and Console Emulation.
    Replies: 13
    Last Post: 4th January 2007, 07:55 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •