Jump to content
Due to a large amount of spamers, accounts will now have to be approved by the Admins so please be patient. ×
IGNORED

Dimensions of Attack From Mars Pin please


stuzza

Recommended Posts

WMS version

 

Main cab

Front - 557 (w) 398 (h)

Side - 1310 (w) 398 (h - front) 606 (h - rear)

The flat section that the headbox sits on is 183mm (after which it tapers to the front)

 

Headbox

Side - 728 (h) 162 (w - bottom) 250 (w - top)

 

Let me know if you need any other measurements

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

WMS version

 

Main cab

Front - 557 (w) 398 (h)

Side - 1310 (w) 398 (h - front) 606 (h - rear)

The flat section that the headbox sits on is 183mm (after which it tapers to the front)

 

Headbox

Side - 728 (h) 162 (w - bottom) 250 (w - top)

 

Let me know if you need any other measurements

 

 

Sent from my iPhone using Tapatalk

 

Thanks. Does the flat section (183mm) have a small drop before it starts to slope? Like 15-20mm or so?

Link to comment
Share on other sites

No it’s parallel to the base of the cabinet. When the cab is installed on legs the base angles down and this is why the headbox leans forward.

 

I double checked the back cab height it’s 607 (not 606 as mentioned above)

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

No it’s parallel to the base of the cabinet. When the cab is installed on legs the base angles down and this is why the headbox leans forward.

 

I double checked the back cab height it’s 607 (not 606 as mentioned above)

 

 

Sent from my iPhone using Tapatalk

 

Yeah I know parallel, just on some cabs it has a small vertical section before going to the slope part. This is to help fit the side rails etc..

 

See in this pic:

 

NsHvei8h.jpg

 

 

Shouldn't really matter on this art anyway as nothing depends on the slope. Just good for me to know for future. :)

Link to comment
Share on other sites

Yep you're right - as the rail goes from that point and under the rail is the plastic holder for the playfield glass. There was enough gap between the rail and the flat top to measure the depth it's around 11mm drop.

 

7a65f43312f63ec2c7298c5ba9042b0c.jpg

Edited by Manny65
Corrected
Link to comment
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...