Jump to content
Due to a large amount of spamers, accounts will now have to be approved by the Admins so please be patient. ×
  • 0
IGNORED

Bally Supersonic Drop Target Assembly Issue


LAP

Question

I recently bought Supersonic machine and the drop targets were old worn and had a tendency so stick so I thought I would replace the worn drop targets and while I was at it service the whole assemble and give it a once over.

 

Assembly Diagram and Before Picture:

776963573_BallyDropTargetAssembly(AS-2795-).thumb.jpg.e1fb9a611cdc0f5ec620a0b6e365aca4.jpg IMG_20190908_204846.thumb.jpg.b981747f59a6f311e66334d917cb9c53.jpg

 

 

 

After replacements drop targets installed and assembly serviced and cleaned..... but after each reset 2 or 3 of the 5 Drop Targets are pushed up too high and then are stuck up and don't drop when hit

 

IMG_20190909_200108.thumb.jpg.9b0ef9a3b3e22b89f6c5261d0b8c4f4f.jpg

 

Case where Drop Target does work ==> Where Reset Link arm is in the groove on back End Plate

 

IMG_20190909_195922.thumb.jpg.b32468803b25e74e941d11da1cd8882b.jpgIMG_20190909_195932.thumb.jpg.b5b8b98fb375dc8351d0603409a128a6.jpg

 

Case where Drop Target does not works ==> Where Reset Link arm is outside the groove on back End Plate

 

IMG_20190909_195747.thumb.jpg.a6684699b99acd7b89b4c60ba400b33c.jpgIMG_20190909_195946.thumb.jpg.353a2dbd9c456f3a145456aba24e8651.jpg

 

 

I suspect it is a matter of the Reset Bar pushing the Reset Links too high so the Reset Links slip out of the groove on the back End Plate and I was struggling to find where this can be adjusted...

 

Any help or suggestions welcome....

 

Jason

Link to comment
Share on other sites

5 answers to this question

Recommended Posts

  • 0
I recently bought Supersonic machine and the drop targets were old worn and had a tendency so stick so I thought I would replace the worn drop targets and while I was at it service the whole assemble and give it a once over.

 

Assembly Diagram and Before Picture:

https://www.aussiearcade.com/attachment.php?attachmentid=153250 https://www.aussiearcade.com/attachment.php?attachmentid=153243

 

 

 

After replacements drop targets installed and assembly serviced and cleaned..... but after each reset 2 or 3 of the 5 Drop Targets are pushed up too high and then are stuck up and don't drop when hit

 

https://www.aussiearcade.com/attachment.php?attachmentid=153245

 

Case where Drop Target does work ==> Where Reset Link arm is in the groove on back End Plate

 

https://www.aussiearcade.com/attachment.php?attachmentid=153247https://www.aussiearcade.com/attachment.php?attachmentid=153248

 

Case where Drop Target does not works ==> Where Reset Link arm is outside the groove on back End Plate

 

https://www.aussiearcade.com/attachment.php?attachmentid=153246https://www.aussiearcade.com/attachment.php?attachmentid=153249

 

 

I suspect it is a matter of the Reset Bar pushing the Reset Links too high so the Reset Links slip out of the groove on the back End Plate and I was struggling to find where this can be adjusted...

 

Any help or suggestions welcome....

 

Jason

Where did you find one of those? Havent seen one for sale in years .. probably would have grabbed it if I had.

no ideas re your drop target issue .. sorry

 

Sent from my SM-A520F using Aussie Arcade mobile app

Link to comment
Share on other sites

  • 0

@greydog and @Dedrok thanks for the spot it was doing my head in and your suggestion worked a treat....

 

I am a massive consumer of video's and online guides so when I can't find a "how to" video online of what I am looking to fix or do, I feel its only right to give a little back so will try to document it and put it up on YouTube. Below are the three parts of me stripping down and reassembling this Bally Supersonic's 5 bank drop target assembly (AS-2795). Hope it helps someone.

 

 

 

 

 

Jason

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...