Thanks Thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Taito Vewlix Diamond Replica Project

  1. #1
    Join Date
    May 2015
    State
    Istanbul
    Posts
    10
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Taito Vewlix Diamond Replica Project

    Hello guys.
    I finished my Custom Vewlix Diamond Edition Cabinet.
    I made it by MDF. You can see the all images of the whole process.
    The whole process is about 2 months. I didn't work full time.

    I design it for PC and PS3 for now. But after Niko Release the Nesica Multi system, i will put my Taito Type X2 main board in the cabinet. And i will wire the all system for jamma.
    For now Im just using it with Attract mode Fronted.

    You can watch the video:



    First 3D Drawing.







    Main Case





    I draw the all Control Panel layout as Vector graphic with Adobe Illustrator.




    Control Panel




    Side Parts. Made by 2 MDF (18mm)


    Its a small hole for the monitor bezel. It is sliding. It can be remove easily


    Back


    Fake Nesica Card Reader


    These are not MDF. It is wood.



    Top Layer. I fix 6 pieces of MDF then sanding



    Monitor Bezel




    All Finished before painting.



    After Paint.



    Marquee Arts And Side Arts and Control Panel Before printing.


    After UV Print on the Plexi Glass Directly. ( Not Paper )



    Lets Bring my home


    Samsung 32" TV


    Metal part for control panel. I put it under the Plexi Glass. Metal is 1.2mm thick. And Plexi is 2.8mm



    Hımm Not Bad




    I covered the whole Marquee plexiglass glass with Car Glass Film.


    Side Arts


    Control Panel


    Other arts for the instruction panels.



    And Finish 8o 8o

    Last edited by hursit; 4 Weeks Ago at 03:04 PM.

  2. #2
    Join Date
    Mar 2015
    State
    Tasmania
    Posts
    1,408
    Mentioned
    70 Post(s)
    Quoted
    461 Post(s)
    I like it, but can't see most of the pics. I'm at work so it might be the net filter.

  3. #3
    Join Date
    Jul 2008
    State
    Auckland
    Posts
    1,180
    Mentioned
    22 Post(s)
    Quoted
    294 Post(s)
    same as above, can only see 1 pic

  4. #4
    Join Date
    May 2015
    State
    Istanbul
    Posts
    10
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Sorry people
    I think it was about of the upload website. I have changed the source. It looks ok for now

    Thank you...

  5. #5
    Join Date
    Jul 2008
    State
    Auckland
    Posts
    1,180
    Mentioned
    22 Post(s)
    Quoted
    294 Post(s)
    very nice job

  6. #6
    Join Date
    May 2015
    State
    Istanbul
    Posts
    10
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Quote Originally Posted by loki4101 View Post
    very nice job
    thanks....

  7. #7
    Join Date
    Jul 2006
    State
    Adelaide
    Posts
    5,813
    Mentioned
    64 Post(s)
    Quoted
    355 Post(s)
    Great work. Esp the shaping of the MDF

  8. #8
    Join Date
    May 2015
    State
    Istanbul
    Posts
    10
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Quote Originally Posted by Crafty View Post
    Great work. Esp the shaping of the MDF
    Thank you...

  9. #9
    Join Date
    Jun 2008
    State
    Brisbane, QLD
    Posts
    2,605
    Mentioned
    254 Post(s)
    Quoted
    503 Post(s)
    That's a fine piece of craftsmanship, thanks for sharing.
    Namco Starblade - Taito Cocktail 14" x 3, 20" x 2 - NZ SI PtII Upright - Chase HQ DX, Taito Top Speed - Taito Grand Champion - Taito Safari - LAI SI Head to Head Cocktail - SI Cocktail Clone x 2, Pong Clone x 3

  10. #10
    Join Date
    Apr 2008
    State
    Tasmania
    Posts
    4,244
    Mentioned
    232 Post(s)
    Quoted
    1279 Post(s)
    Looks great, I wish I had the tools and skills to do similar, I would fill my house with all sorts of cabs
    Winter is here and I'm still riding more than gaming, my current goal = 100,000 meters elevation gain for the year - well ahead so far

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Will a Taito Vewlix L run JAMMA pcbs?
    By Pinballer in forum Arcade
    Replies: 1
    Last Post: 17th April 2019, 09:38 PM
  2. Vewlix Diamond Arcade Cabiet Artworks
    By hursit in forum Aussie Arcade Artwork Resource
    Replies: 1
    Last Post: 21st July 2017, 10:46 PM
  3. Where to buy Taito Vewlix C cabinet?
    By modology in forum Arcade
    Replies: 6
    Last Post: 5th September 2015, 02:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •