Jump to content
Due to a large amount of spamers, accounts will now have to be approved by the Admins so please be patient. ×

Scotto

Aussie Arcade Member
 View Profile  See their activity

  • Posts

    71

  • Joined

  • Last visited

 Content Type 

Everything posted by Scotto

  1. Scotto
    These got capacitors on them? Think I solved a similar issue by clipping 1 leg Sent from my CPH1725 using Tapatalk
  2. Scotto
    You still chasing a control panel. Pretty sure I got 1. Sent from my CPH1725 using Tapatalk
  3. Scotto
    Was talking to Tony at pinball shed somewhere in the last 12 months. He had 1. Sent from my CPH1725 using Tapatalk
  4. Scotto
    With my BOX method Id look at 38. You also mentioned spinner issues so look at 37 and 29. I'd be cautiously replacing diodes to rule them out. You should be able to duplicate issues in Switch test?!?!? Sent from my SM-N910G using Tapatalk
  5. Scotto
    I'd maybe replace the diode on the switchs as Autosteve suggested. Start with 39 and see what happens. Sent from my SM-N910G using Tapatalk
  6. Scotto
    I need to do the upper mini flippers on my Genie. Is this pretty much the same kit I need? Scotto Sent from my SM-N910G using Tapatalk
  7. Scotto
    Reckon I had a similar issue ages ago on my TFTC or JP. Have a read about the Solid State Flipper Board. I think my weakish flipper related to a worn out fuse clip. Sent from my SM-N910G using Tapatalk
  8. Scotto
    So no playfield coils? I'd suspect a fuse has blown. Sent from my SM-N910G using Tapatalk
  9. Scotto
    Hi all First time trying to sort out classic Bally Lamp Driver issues. Got some 2n5060 ready to drop in. Just trying to find a MCR106 substitute at my local Jaycar. Will this do the job? https://www.jaycar.com.au/c106d1-400v-4a-scr/p/ZX7006 https://www.jaycar.com.au/c106d1-400v-4a-scr/p/ZX7006 Sent from my SM-N910G using Tapatalk
  10. Scotto
    I'd be checking the Power Supply. Check and reseat connectors. Has the Power Supply been rebuilt? If not it'll need it. I've had sound dropouts due to weak fuse clips on the Power Supply. Sent from my SM-N910G using Tapatalk
  11. Scotto
    Very Jelly! Sent from my SM-N910G using Tapatalk
  12. Scotto
    Check switch 6 on the coin door. The open door in test mode might mean that the switch/wiring isnt being messed with so you cant duplicate issues. Seems that all switches you mention are in rows 1 2 and 3. Check 54 as its the corner of the box. Sent from my SM-N910G using Tapatalk
  13. Scotto
    What switch numbers are you talking about? Can u produce the funny stuff in switch test mode? Try and narrow it down if you can. I'm not promoting random part replacement but I had a similar thing that was a little inconsistent on a DE machine. I ended up replacing some switch diodes just to rule them out and finally found a dodgy diode. Sent from my SM-N910G using Tapatalk
  14. Scotto
    How'd you get on? Get it sorted? Sent from my SM-N910G using Tapatalk
  15. Scotto
    My JP and TFTC were both a little wonky. I glued toothpicks in and chiseled them off. Screw goes in nice and tight. Sent from my SM-N910G using Tapatalk
  16. Scotto
    I had to delete some funny characters at da end when i clicked the link Sent from my SM-N910G using Aussie Arcade mobile app
  17. Scotto
    No coils??? Done a fuse perhaps? Sent from my SM-N910G using Tapatalk
  18. Scotto
    Im not familiar with the m echanisms in Joker Poker but my Totem has a large drop target bank that was doing my head in recently after cleaning. Make sure the targets arent rubbing... too far forward or against the playfield. I found that new sleeves helped performance greatly. Make sure you use the longer to keep the mech aligned. Sent from my SM-N910G using Tapatalk
  19. Scotto
    I always grab the manual and highlight all the suspect switches in the matrix. 22 23 24 38 and 40 make a square. Start by checking the corners. Sounds like you're thinking about closed switches causing issues. Check for loose diodes... replace if in doubt. Try and replicate issues in test mode.
  20. Scotto
    The Outfoxies is another I discovered fairly recently. Good fun 2 player vs each other. Sent from my SM-N910G using Tapatalk
  21. Scotto
    Hold the phone!!! Freaked the EB girl out when I said I'd take the box!!! Sent from my SM-N910G using Tapatalk
  22. Scotto
    Anyone seen the other versions anywhere? Keen to grab the 1 with whitewall tyres . Sent from my SM-N910G using Tapatalk
  23. Scotto
    Spewing. My local EB only had 1 in stock! Sent from my SM-N910G using Tapatalk
  24. Scotto
    Hey guys Anyone used the Gottlieb displays the Bostonpinballcompany make? Thinking about grabbing a set for my Genie. Can't find original displays cheap anywhere. Keen to hear reviews. SCOTTO
  25. Scotto
    Great work. Cabinet looks awesome.
×
×
  • Create New...