Gruntis

Hey gumnut. Interested in the light up shooter rod. I'll take it off your hands. I'll send you a pm. Cheers

Unfortunately bluetooth wouldn't work as there is no 3.5mm jack. That what I plan to add. You can get replacement front panels with the jack and volume controls already done and behind the plate is the circuitry to connect it to the header on the cpu board. The issue is that up until recently the panels on the front were small and now they have the large panels. As they come from overseas, picking the wrong one would be expensive https://pinnovators.myshopify.com/collections/stern-headphone-kits/products/pinpac-4-mac-spike-spike2-export-headphone-kit-with-mute-for-stern-spike2-systems Or https://pinnovators.myshopify.com/collections/stern-headphone-kits/products/pinpac-4-stern-spike-spike2-headphone-kit-with-mute

You're probably right. Anyone out there with a Foo Fighters or something else they bought this year who can confirm the larger panel? I attached a picture of my actual door

Hey Guys, Got a question about Sterns released this year. I picked up a Godzilla premium a couple weeks back and getting a Jurassic Park later on. I'm interested in getting headphone jacks for the coin doors but I thought Aussie sterns had a smaller plate then the US doors. The Godzilla has a large plate and I was wondering if they have change the coin door for all machines being released or if a batch was released with different doors. Can anyone who purchase a new machine this year confirm that the plate size on the door is now the standard US size?

Did you know diarrhoea is hereditary. It runs in your jeans

Good to know, thanks

Hey guys, After having to sell all my machines a few years back I'm back in a position to get some back. Got a Jurassic Park and a Godzilla coming in a few months. Saw on pinside the sterns have a loud power supply fan that's too loud in a home environment. It's this the case for the Aussie delivered ones as well? If that's the case I figured I'd get the required fans early as it takes a while for overseas postage. Are you replacing fans or found it to be a non issue? Cheers Grant

Hopeful bump 😄

Looking for a Simpson's Pinball Party. Preferably HUO. Cheers

So i checked the power and the neg fell out of the adapter. You beauty I thought. Wired it back up and nothing changed. Tested the voltage and i have 5.2v at the adapter and screens. When I plug and unplug the usb I get the windows sound but i can't see any new devices, can't find pin2dmd listed anywhere. Went to all devices in Z-Diag and could not find it listed either. I think the biggest concern I have is that the splash screen isn't displaying

I haven't had the chance to check yet but with the info you guys have supplied I'm guessing you are right about the power. I definitely don't get the splash screen. And it was working perfectly before. Sent from my SM-G950F using Aussie Arcade mobile app

I'll try both suggestions. Is there a minimum spec required to run the pin2dmd? Would it run on a win 10 tablet for testing purposes? Sent from my SM-G950F using Aussie Arcade mobile app

The screen stays blank, no test pattern. When I run DMDtest I get nothing also. When I run the pin2dmd.exe application it opens up "pin2dmd v2.36 colorprism" program. I did try running ZADIG to redo the driver but I couldn't find pin2dmd listed in the devices. When pinballX runs I get the error message "pin2dmd not found" every time a dmd table comes up on the selection screen.

That's a thought. Will give it a go when i have the time, be a bit of a process on mine to replace it. Sent from my SM-G950F using Aussie Arcade mobile app

No, nothing there. Can't find anything in device manager either.

Here's what the bank looks like. The top red led is flashing (back red led in picture) Sent from my SM-G950F using Aussie Arcade mobile app

After reinstalling window and visual pinball I had my virtual pinnie running great. Used it a few times without issue and then started it last week and now I can't get my PIN2DMD working :realmad: It can't find it at all. It has power and is connected to the PC. I have tried power cycling, different USB ports but no good. Any one have any advice?? Also I don't see pin2dmd with the colours bands appear on the screen on start up

Your a champion Jed. Sound manager is working again. Now i can get back to playing Sent from my SM-G950F using Aussie Arcade mobile app

Thanks Jed. Will give it a try. Your help is much appreciated. Sent from my SM-G950F using Aussie Arcade mobile app

Yep option there but when i click on it, nothing. If i open the image manager below it it opens fine. Fairly sure I've got the latest ms.net, think it's 4.7 Sent from my SM-G950F using Aussie Arcade mobile app

Completely reinstalled a number of times now and still no sound manager. Looking like I'm just going to have to play them as is. Sent from my SM-G950F using Aussie Arcade mobile app

Cheers Jed. Will give that a try next. Sent from my SM-G950F using Aussie Arcade mobile app

Just tried the 10.5 beta and no change. Still can't access the sound manager. Any other ideas out there?? Sent from my SM-G950F using Aussie Arcade mobile app

Haven't used my cab in months due to windows playing up and causing freezes with vpx. Finally got round to fixing up windows and the millions of updates it wanted. Now I have a nice smooth running cab. The problem i have is though, I'm running a very basic version of Rusty's Poor Mans DOF and I need to turn a few sounds up. Sounds simple but after updating to 10.4 stable I can no longer bring up the sound manager, I click but nothing opens. Any ideas?

Not sure if its a good score 393,200 Sent from my SM-G930F using Aussie Arcade mobile app