Jump to content
Due to a large amount of spamers, accounts will now have to be approved by the Admins so please be patient. ×
IGNORED

Astro City Monitor Pinout


Recommended Posts

Does anybody have the details for the Astro City Monitor Pinout?

 

I've been given a Toshiba Tube and MS9 chassis that has been sent to Jomac for repair, unfortunately, the connections on the MS9 do not match the 15 pin TE AMP UP connection of the Astro City.

 

I'm planning on making my own connector so I can plug directly to the Astro City.

 

Has anybody done this before?

 

TIA.

Link to comment
Share on other sites

@SpudJones has done this, he's your man.

 

Thanks for that. I'll message him.

 

Good luck....

ive got the kit for change over the plugs ..Easy to source...

 

Have you got a pic of this kit?

 

I just received a package from digi key to make my kick harness, it's unfortunate I didn't have the tube/chassis a couple of weeks ago as I would have ordered a 15 pin TE AMP Up connector. Only got the 10 pin for the kick harness.

Link to comment
Share on other sites

Thanks for that. I'll message him.

 

 

 

Have you got a pic of this kit?

 

I just received a package from digi key to make my kick harness, it's unfortunate I didn't have the tube/chassis a couple of weeks ago as I would have ordered a 15 pin TE AMP Up connector. Only got the 10 pin for the kick harness.

I thought you Already got it under control by pm the above Aa member....

Good luck...

Link to comment
Share on other sites

Plug pinout for Astro City monitor is -

 

5______1

|E|S|B|G|R|

|D|D|_|A|A|

|_|_|_|_|_|

15_____11

where E=GND, S=Sync, A=AC and D=Degauss

I usually don't bother wiring in the Degauss.

View is looking at the female plug (which has male pins in it) front on as if you were going to plug the male end from the cabinet into it.

 

You want a 15 pin AMP Universal Power plug 3.96mm pitch

 

The wiring at the MS9 end could be different depending on the revision but hopefully you can work out what's R,G,B,Sync, GND and AC.

 

Use this information at your own risk.

Link to comment
Share on other sites

Plug pinout for Astro City monitor is -

 

5______1

|E|S|B|G|R|

|D|D|_|A|A|

|_|_|_|_|_|

15_____11

where E=GND, S=Sync, A=AC and D=Degauss

I usually don't bother wiring in the Degauss.

View is looking at the female plug (which has male pins in it) front on as if you were going to plug the male end from the cabinet into it.

 

You want a 15 pin AMP Universal Power plug 3.96mm pitch

 

The wiring at the MS9 end could be different depending on the revision but hopefully you can work out what's R,G,B,Sync, GND and AC.

 

Use this information at your own risk.

 

Thanks. I also found it on the Arcade Otaku wiki lol

 

Ms9pinout.png

 

I've ordered the TE Amp UP plug so it should be a few weeks. Also might buy a ready made plug from dragonlee.

 

I'll report back once I have my chassis back from Joey.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...