joshwaan Posted February 17, 2009 Share Posted February 17, 2009 Hi Guys I purchased a kit from Jason in2amusements.com.au great guy, quick service. http://www.in2amusements.com.au/shop/index.php/20/144_48_In_1_Complete_Arcade_Pack_DIY Basicly this kit without the board and 2 player gear. Bought it so I could get used of how this Jamma stuff works. Just wondering I got the quick connect Jamma that's all fine. Power's all connected up to PSU and to the jamma board. Only thing is I gotta connect the buttons joystick and speakers. Only thing I'm not sure about is on the buttons and joystick there's 3 connectors. Which one is ground and input connections, I'm a little confisued? If I make a mistake with the connectors it will not damage anything right? what I mean is the buttons or joystick the power and monitor are sperate. Could someone share some lite, very new to this. Trying to connect my Tekken 1 board. THanks JOsh Link to comment Share on other sites More sharing options...
Super Moderator GIBO Posted February 17, 2009 Super Moderator Share Posted February 17, 2009 Usually the pin on top of the micro is ground but you will need to look at the side of the micro switch to determine which other connector you use ,it will need to be the normally open one ( ie N/O ) Link to comment Share on other sites More sharing options...
joshwaan Posted February 17, 2009 Author Share Posted February 17, 2009 Hi Np, so ground it, there's like 15 ground pins coming off one cable I guess I use 1 of them hehe. So really I can't go wrong, if I do the game just will not work with that button. This is the jamma harness I have http://www.in2amusements.com.au/shop/index.php/13/134_JAMMA_Extended_Wiring_Harness_With_English_Labels Thanks very much JOsh Link to comment Share on other sites More sharing options...
Super Moderator GIBO Posted February 17, 2009 Super Moderator Share Posted February 17, 2009 One thing you will need to be careful of is wiring up the speakers,Tekken is stereo and from memory jaspers harnesses are marked for stereo so just follow the sticker on the plug but you will need to check the pinout of any other game you decide to swap into the cab as the standard pinout for Jamma is mono Link to comment Share on other sites More sharing options...
joshwaan Posted February 17, 2009 Author Share Posted February 17, 2009 One thing you will need to be careful of is wiring up the speakers,Tekken is stereo and from memory jaspers harnesses are marked for stereo so just follow the sticker on the plug but you will need to check the pinout of any other game you decide to swap into the cab as the standard pinout for Jamma is mono Cheers Gibo for that, so when I play say MK2 or Vendetta I need to unplug say the left Pin connector from the Jamma. Or is it best to unplug the quick connector from speaker. So even if I get left mixed up with right on the joystick it will not damage the kit? I'm sorry I sound like a dumbass, just want to be sure of this shit :P Link to comment Share on other sites More sharing options...
Super Moderator GIBO Posted February 17, 2009 Super Moderator Share Posted February 17, 2009 Cheers Gibo for that, so when I play say MK2 or Vendetta I need to unplug say the left Pin connector from the Jamma. Or is it best to unplug the quick connector from speaker. So even if I get left mixed up with right on the joystick it will not damage the kit? I'm sorry I sound like a dumbass, just want to be sure of this shit :P Dont worry about the questions we all started somewhere,Vendetta you wont have a problem as that is stereo but MK2 you will as thats Mono.No it wont matter if you get L or R mixed up just make sure that its on the N/O connector.How many speakers in your cab? Link to comment Share on other sites More sharing options...
joshwaan Posted February 17, 2009 Author Share Posted February 17, 2009 (edited) Dont worry about the questions we all started somewhere,Vendetta you wont have a problem as that is stereo but MK2 you will as thats Mono.No it wont matter if you get L or R mixed up just make sure that its on the N/O connector.How many speakers in your cab? Just 2 mate, so I have to have the white connector with is for the speaker L and R on the N/O connector or does the ground go there? With the Sanwa Bat Joystick is that the same drill? Say if I boot tekken up later and not all buttons are connected would it still work. Just for test reasons? Oh with the speakers I got 8 ohm 10cm speakers 5 Watts each. Is there any better then this to give a nice bassy effect. I want Tekken to have the bass effect I heard in the arcades years ago hehe :P Thanks very much for all the help :) Edited February 17, 2009 by joshwaan Link to comment Share on other sites More sharing options...
Super Moderator GIBO Posted February 18, 2009 Super Moderator Share Posted February 18, 2009 As far as Tekken goes just run the the white wire from the parts/component side of your jamma plug to the Positive terminal on the left speaker speaker,run the other white wire from the solder side of your jamma plug to the Negative of your left speaker .you will need to wire up a kick harness to get the right speaker to work and your 3rd and 4th kick buttons,I suggest you download the manual for tekken http://arcadeconnection.serverbox.org/arcade%20machines/english/index.html and look at the pinout for it as you will need another plug and some more wires(kick harness) to answer your questions yes it will play with not all the buttons connected but wont be much fun and your speakers will be fine but if your after something better look at some car speakers Link to comment Share on other sites More sharing options...
joshwaan Posted February 18, 2009 Author Share Posted February 18, 2009 As far as Tekken goes just run the the white wire from the parts/component side of your jamma plug to the Positive terminal on the left speaker speaker,run the other white wire from the solder side of your jamma plug to the Negative of your left speaker .you will need to wire up a kick harness to get the right speaker to work and your 3rd and 4th kick buttons,I suggest you download the manual for tekken http://arcadeconnection.serverbox.org/arcade%20machines/english/index.html and look at the pinout for it as you will need another plug and some more wires(kick harness) to answer your questions yes it will play with not all the buttons connected but wont be much fun and your speakers will be fine but if your after something better look at some car speakers The speakers are connected together with 1 white wire. So I followed the LF white wire from Jamma to the left spekaers plug in the spade connector. I did the same for the right? Is this incorrect? I pretty sure I'm getting a kick harness with Tekken, should recieve today. :) Car Speakers hey, what do you reckamend? I want punchy bass sound ;) Thanks for everything. Link to comment Share on other sites More sharing options...
joshwaan Posted February 19, 2009 Author Share Posted February 19, 2009 Update: Got it working, love the good morning on Tekken. So yeah it's going working great. one thing it's farking loud how do I adjust this? Also I have a kick harness with the PCB board. I have 4 buttons plug in only 2 working why is this? Do I really need the kick harness for the 2 other buttons work? The adaptor has wires coming off it but with no spade connectors, how should I connect these? I'll love to get the other speaker working. THanks josh Link to comment Share on other sites More sharing options...
Super Moderator GIBO Posted February 19, 2009 Super Moderator Share Posted February 19, 2009 Yes mate you will need to connect the kick harness to get the other 2 buttons to work and the right speaker,just buy some connectors from most auto shops to connect the wires to the micros.Did you download the manual its all in there Link to comment Share on other sites More sharing options...
narf_ Posted February 19, 2009 Share Posted February 19, 2009 http://arcarc.xmission.com/PDF_Arcade_Manuals_and_Schematics/ Tekken.pdf 19-Jul-2002 17:57 123K Link to comment Share on other sites More sharing options...
AdamC Posted February 19, 2009 Share Posted February 19, 2009 Good link , narf. Thanks for that one. I just downloaded info on one of my carts Link to comment Share on other sites More sharing options...
narf_ Posted February 19, 2009 Share Posted February 19, 2009 its a good site arcade and pinnie porn there to boot also :lol Link to comment Share on other sites More sharing options...
joshwaan Posted February 19, 2009 Author Share Posted February 19, 2009 (edited) Yes mate you will need to connect the kick harness to get the other 2 buttons to work and the right speaker,just buy some connectors from most auto shops to connect the wires to the micros.Did you download the manual its all in there So i buy some spade connectors and a crimper? Update: I bought a Electrical Terminals Blade female Wire: 3mm Tab: 6.3mm Qty: 18 (1/4") So with these connectors I can just get some puliers and press on the wire from the NAMCO 48-Pin Extended JAMMA (JAMMA+) Harness. Thanks again for all the help mate :) Edited February 20, 2009 by joshwaan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now