Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 15/02/21 in all areas

  1. We played on relatively old code also... 1.06? I think, now up to 1.14 Bluetooth works great with any device, lag is almost unnoticeable. Also updating through wifi was very easy and fast with no problems. Simple and cheap tech these days but good to see it added here.
    6 points
  2. Nup Got to disagree there.... 9 thru 11 for me When I was 19 it was all about the grog and the girls.......... 1988 - Expo I was 19 and found my ex wife whilst on the Grog at Brisvegas's South Bank......... Should have kept drinking.....:unsure
    4 points
  3. SOLD For Sale is my lowboy arcade machine in good working condition. Comes with new buttons, new game board and new wiring and lcd monitor. Pickup is from Runcorn (Brisbane southside). Now $650
    3 points
  4. Haha. Nice. Loved the shots on this game. Light show is excellent and I still get “vision wobble� even with the glasses. On WoZ it goes away. For the record, none of the bolts were loose and we only had to tweak the right flipper alignment a tiny bit. Most would not have noticed. Played as is setting out of box , except for adult mode. Had leg levellers on back wound half way up. Plays nice and not floaty. Left ramp is backhanded easily, both Bass and guitar shots can be made directly depending on ramp entry angles. Drum sticks ramp also easily backhanded. Centre hole shot was easy, no rejects and can also be rebounded into from right flipper. Inner loop to bumpers is a sweet shot and can also be rebounded into from right flipper. Only played 2 games but want to play much more.
    3 points
  5. My Lexy Lightspeed is on freeplay in our home theatre showroom. Soundline Audio, 147 Thorndon Quay, Wellington
    2 points
  6. Thanks for all the birthday wishes,had a great day,wife fell asleep on the couch so I spent all day in the shed. Just another day when your over 50
    2 points
  7. Yep, that's the most useful feature- stops you from drinking VB.
    2 points
  8. Completed the basic cab. Only the backdoor to the back box left. Primed and ready for artwork.
    2 points
  9. Hello all, Just wondering if anyone in the South-East Melbourne area could lend a degaussing wand to run through my monitor? Any help is highly appreciated! Thanks!
    1 point
  10. that does not make it any better the ANA were kinda white supremacists' Australian Natives' Association - Wikipedia
    1 point
  11. I worked it out. The pots on the Chinese VGA converter card when set at 100 (all the way up) are completely unbalanced RGB colours. So it was turn green down a little turn red up, turn blue a little etc etc untiI got it pretty much how I want it. To it really was the VGA adapter. Here is a low res crappy image from a stream but you can see the green is nice and dark.
    1 point
  12. So my EM has a bell but no chimes.... I find everyone has an idea about who to contact but No one has these or don't want to sell them??? So my thoughts are to see who may have, or want to get involved in getting some? To date I have spoken to about 10 repairers and or parts suppliers and have really been told they are great and will enhance the machine and playing experience. DUR:rolleyes Basically I have found only 1 option and I'm looking to see if there is a market for these seemingly overpriced chime units. I can't seem to pay good money for an original one and don't seem to see these for sale (which seems rare) until there sold... This is an option that seems to pop up. https://www.chimeunit.com/ Has anyone used these and are they right for the job. I have not mentioned the machine thus I need these for a Gottlieb 1970 single player Baseball EM. 3 chime unit. Is anyone interested in maybe sharing costs as due to the weight it should be possible to order approx 5 at a time and the freight will be the same. 2 week approx build date, plus postage plus lockdown 14 days upon arrival :lol So an order may be sometime this year... Approx cost is 129 Euro per unit plus postage....that's around $200 each as the current exchange price and postage is close to $100 if I have worked this out correctly. Any thoughts appreciated Any Australian option consider it practically sold...:cool:
    1 point
  13. Brian snap....I can't understand a freaken word he's saying....Who is this clown an Irish union rep.....:unsure Needs sub-titles....:blink:
    1 point
  14. And please remove the Centaur 2 also. Thanks again.
    1 point
  15. That is 100% what I was chasing. Cheers dude!
    1 point
  16. Hi Michi, I have Tyson on the scoresheets even thou he isn't listed on Rusty's 1st post.... Same with Mrs Madal.... @madal if I was your Mrs I would be mad too:lol
    1 point
  17. Ask her if she forgot to pay the power bill.:unsure You know, reverse the blame. Then send her off to pay at the shop. At least then you will get a few more hours in before Death occurs...:lol
    1 point
  18. If you didn't mention TMNT the list would be overflowing by now:lol
    1 point
  19. That's because you didn't pay the extra $1k:lol For a few hundred more you might get Balls...... For the machine that is....:D:D:D
    1 point
  20. Yeah mine arrived with 1.08 loaded and played a few games before updating to 1.14. Updating over wifi is so easy and quick, much prefer this to using a USB.
    1 point
  21. https://www.aussiearcade.com/forum/trading-forum/for-sale/for-sale-arcade-open-for-posting/2176431-lowboy-with-60-in-1-game-board#post2193192
    1 point
  22. its just a simple 3.9v zener try jaycar 3.9V 1N4730 1 Watt Zener Diode | Jaycar Electronics
    1 point
  23. 1 point
  24. Turn it on and off real fast, it will look like its twinkling :D you could be in trouble finding another little controller like that....
    1 point
  25. If it ain’t broke don’t fix it it’s been tried many times in the past when they have tried new concepts which have been major flops and it’s been proven that the majority just like things the way they are
    1 point
  26. grew up on EM's in the 70's and to go to a billiard hall and play Williams Phoenix with those pointy flippers and sounds that appealed to me, and my favourite Flash....can't really give a particular year, but the mid 70's to early 80's.
    1 point
  27. Looking at a purely manufacturing numbers perspective (from IPDB production numbers which don't necessarily cover all manufacturers), looks like 1978 was the bumper year, with a second spike in 1992. Shame that we don't have more data for modern manufacturers... yet :) This chart includes data for each manufacturer with > 15k total machines manufactured.
    1 point
  28. I only have new sterns. I do have issues regularly say every 300 games, but I don't class them as such as I think I know what causes them. Generally it's to do with drop targets and optos. I need to reseat plugs. Comon denominator is shaker motor. I had less issues with older games as they had no shaker. Also before adding a shaker to both met and twd I didn't have target problems.
    1 point
  29. Available on ebay for aprox $10 each. Just a heads up on these cheap Chinese power supplies in case you were thinking of using them on any projects. As on any cost cutting cheap product, Components are minimal and often run hot which causes failure. Beware, When these fail they cause a short across the mains which is quite spectacular. I had two fail (spectacularly) before I realized a bad diode was shorting the 5v line.
    1 point
  30. Because Pete, Unlike polluted China we have EVRYTHING they could ever want, SPACE, CLEAN AIR. FRESH SPARKLING WATER, FRESH FOOD, URANIUM, IRON, MINERALS, SEAFOOD, COAL, BABY FOOD & TOILET PAPER. We have the lot, so why buy it if you can just take ownership of it.
    1 point
  31. Wont be long before under water submarine drones rock up to every port in Australia armed with a nuke in it. Then China say's sign here or else & welcome to "New China" passport please!
    1 point
  32. My LE arrived in Sydney today. Will be on site very soon. Beers, Guns N Pinball!!!
    1 point
  33. My side art came today (local print shop can do EVERYTHING!) ~$45 each side. Application was super simple. I did have to cut them out with a razor knife though, quite tedious. Ohh... and a new high score :)
    1 point
This leaderboard is set to Brisbane/GMT+10:00
×
×
  • Create New...