Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 05/08/20 in all areas

  1. These number plates have never been attached to anything. I have owned them since 7 character plates first went on sale Buyer can attach to any QLD registered vehicle or just hang them on your wall Selling for what they cost me. $7000
    3 points
  2. Hi, I’ve had enough of seeing the “you’ve never posted� message! So, I’ve subscribed, and ... I got my first pinny at the start of 2018 - Dirty Harry. A few months later I stumbled on a Spanish Eyes for $200 - I’ve restored and just need to work out how to set to free play. Since then, I’ve added Superman project, Hulk, Xenon project Jack in a Box, Rocky and Bullwinkle project, Jungle Lord project, acdc, pharaoh (via this site) and Wizard of Oz. The projects have given me a hobby - which I needed. Thanks
    3 points
  3. i was the only one who didnt get 1 mil :redface
    3 points
  4. Got one �
    3 points
  5. I'm looking at making them locally Grunta soon, sick of waiting for pinbits etc. I have quite a few title profiles ready. Ive hand made my own for a alot of games (including Centaur shooter lane). I will be getting more material and talking to laser cutters over the next month or two to look at options. Im not as techo as RPZ but the ones I have made have made me full hard !
    2 points
  6. I am going to try a gold and black hammer tone powder coat. Bite off more than you can chew and chew like hell.
    2 points
  7. PM;s have been sent out, please let me know if i missed anyone
    2 points
  8. Galaga Repo restoration Part 3 Installed the monitor,bezel and cpo.
    2 points
  9. Finally someone made it over 10K. Nice work. Much more in score to go though ... :026:
    2 points
  10. 23,160pts Fun. Took me a few tries to even get this. Will play more. dorunrun23160pts.zip
    2 points
  11. shim roll from Blackwoods https://www.blackwoods.com.au/power-transmission/shim-brass-steel-stainless-steel-grade-304-316-copper-plastic/shim-steel-stainless-steel-grade-304-316/shim-ss-0-008-x6-x50-roll-0-20mm/p/03603344
    2 points
  12. A little bit out the box but you could trim up some scrapers. They are thin and flexible, and would do the job. https://www.bunnings.com.au/craftrig...r-set_p5760135
    2 points
  13. Thanks, There is. But @Ferro has an LE so I want an LE! 😂🤣
    2 points
  14. You’ve got a screw loose? :lol
    2 points
  15. will be posting more updates over the weekend. have bought 3 other woodrails over the past week, so all in the queue they go. gottlieb hi diver 1959, kewpie doll 1960 (last full production woodrail) and just 21 from 1950
    2 points
  16. game no longer available, sold to an a.a. member
    2 points
  17. Don't be stupid. It's a wide body. :laugh:
    2 points
  18. Gday Guys, Im offloading a Namco Noir Hd Cabinet. All original wiring inside. Jvs set up not Jamma This is a working project cabinet which needs Tlc in cleaning product. The cabinet is solid with wear and tear in scuff marks. Control panel missing the front plastic which need to source one due to the old one broke in half. Need to replace the LED strip on the control panel move strip section. No game board in the cabinet. The header will be included. This unit is sold as is in working condition. Inspection welcome Pick up welcome I can shipped this for interstate buyers at your cost plus packaging materials. Asking price $1100 Any question feel free to msg. Cheers Dragonlee
    1 point
  19. So this finally arrived last week after over 6 months since “launch�. Since there’s not many anywhere (350 RE’s worldwide I think) Gonna post some photos and impressions as I unbox her. Got to give a big thanks to @LAP Pinball Evangelist also.
    1 point
  20. Welcome to AA. Sounds like your 'hobby' has really turned into an addiction :laugh:
    1 point
  21. Yes, yes mate, just make sure your eye/s are good for once! Another eye op today. You know what they say about going blind..........I reckon you've been doing too much of it! If doing the job right, then brass/gold plating will need clear over the top if lockdown bar and/or rails are being done, as hands touch these surfaces a lot. You know me Rob, I like to do the job right.
    1 point
  22. 1 point
  23. 2,869,460 I like Centaur Its all about getting the targets in order and flailing away for me i couldn't get the score up without the B2S
    1 point
  24. I am officially COVID-free, got the testing results SMS today, so I'm still in. See you all there.
    1 point
  25. Hobbyist places often have sheets
    1 point
  26. 74,300 i actually like this one, not very good at it though :lol
    1 point
  27. There's a lot of zapping in this game ... :072:
    1 point
  28. Thanks for the update. Not sure what your controller is but have a read of this and even the power strip section - it may help. http://mjrnet.org/pinscape/BuildGuid...e.php?sid=tvon
    1 point
  29. Yes it will work, You get a RGB kit that contains everything you need. Talk with Wayne if you want one. There is another order being placed soon.
    1 point
  30. Hello Wheels and welcome to Aussie Arcade.
    1 point
  31. I did - the reason for the differences is that by default my database merges scores on the same game from multiple MGLs (so I'd only count Q*bert once for example). Also, the database merges each time a game is played into a single master record for that game (so the 9 that I mentioned are scores that are in the all-time top 10 for those games). I need to keep practising to get more!
    1 point
  32. Bloody Mexicans just ruin it for everyone!
    1 point
  33. I think they’ve made the RGB kit compatible with the original MMR’s - maybe a new board needs to be added. But that’s all part of the kit. I hear it’s a bit of a job installing but it’s worth it. Pretty sure the first Oz batch is sold out, but not sure.
    1 point
  34. Shit, totally forgot. Been a crap ass day dealing with the fallout of the Victorian shutdown. So over this shit. Thank god we’ve got pinball to keep us sane.
    1 point
  35. I doubt it as the boards would work with the new system that CGC has produced
    1 point
  36. TMNT Le, due here in Oz first week of September Cowabunga!
    1 point
  37. 142,100 Lighting the spinner = never ever hitting the spinner again...
    1 point
  38. Sometime the faults shown is not always the fault. 1lose screw hits opto board.. 2 or evrytime that thing moves witch is braking a connection or shorting.. 3 Or a faulty opto which i have had.. 4 or that screw got Jamed on that thing which make it think is not moving there for not registering the opto which makes it think there no power to it.. 5 Or its a typical ****ing William machine where if you don't turn on the game for a while it just wants to **** your life for no reason... 6 or your shit at the game and could not hit the target there for its thinking its a fault because the target has not been hit for a while
    1 point
  39. Bit of both Brett.....It’s from a high end restorer’s own collection. He’s from Belgium and was selling these 3 at the same time I had some containers leaving for work. So these games filed what would have been empty space since you pay per container regardless.
    1 point
  40. Didn’t know even the speaker panel is powder coated....
    1 point
  41. Finally, the time has come to start repopulating. I wanted to keep the re-cleared playfield bare for as long as possible. Feels nice and hard now. I’ve ordered some new black oak rails from Reese Rails in the US. They original weren’t in bad shape, but weren’t perfect. Should finish off the job nicely. Cabinet still needs the door inners rebuilt which I’ve been avoiding 😆... slowly getting there.
    1 point
This leaderboard is set to Brisbane/GMT+10:00
×
×
  • Create New...