Jump to content
Due to a large amount of spamers, accounts will now have to be approved by the Admins so please be patient. ×
IGNORED

2x CRT tube and chassis - PCBs - Taito Cocktail Spares


Recommended Posts

14" Toei CRT tested working - From Taito Cocktail

Phosphor is bright and all colours are there. No burn in.

However geometry is a bit off and signal seems to wobble slightly.

Tube seems to be very good however I'd say the chassis needs a service.

Has video connector for taito cocktail harness and power connector for taito cocktail power board.

$150

IMG_4038.thumb.JPG.0b2f59d75eaad589a488df4bdd14123a.JPG IMG_4052.thumb.JPG.9f99a3033f92226f1f780d62166b9f69.JPG IMG_4053.thumb.JPG.87bee0fa966343f6a671a822d81d524c.JPG IMG_4054.thumb.JPG.1816d8f720227837e468a643a1081437.JPG

 

13" CRT tested working

Phosphor also in nice condition with no burn in, good brightness and colour.

However geometry seems to be a bit off. Chassis needs a service.

Original foam surround included but is in bad condition.

Signal, sync and ground are just loose pins.

Power is an American/Japanese power plug.

$150IMG_4051.thumb.JPG.912808d507605c819bc9f997cb06bdc4.JPG


Pengo PCB tested working

Appears to be genuine

Tested on a bench without inputs, sound and video appear to be properly working.

$100

IMG_4063.thumb.JPG.7987312c50ee0dde3c49b528686bf696.JPG

 

Qbert PCB tested working

Seems to be a boot

Tested on a limited bench setup without inputs or sound connected, seemed to have sync issues with both CRTs unsure why.

$100

IMG_4081.thumb.JPG.2e7c7798c356434632121f0350cad2cb.JPG IMG_4082.thumb.JPG.756e0761784d88a5fbf5f0f5b67a6b86.JPG

 

Lady Bug PCB tested has issues

I think it's a boot

Loads garbled graphics and plays a constant tone through the speaker. Video output seems to be working properly though.

Sold

IMG_4067.thumb.JPG.35cd0b4d619bbd915b792c63f6afe3db.JPG IMG_4068.thumb.JPG.ff68fc05b7faa1c807966cf2136f2ad2.JPG

 

Mu-1a PCB believed to be Scramble untested

Board was unable to be tested on limited bench setup

Hasn't been run in many years. Board isn't labeled with specific game, from memory was scramble but might not be.

Sold

IMG_4069.thumb.JPG.60d73acfa125e2ec6f105e789f9abd63.JPG IMG_4070.thumb.JPG.0ddce285ab51596073d4d840449cd580.JPG


Taito Cocktail spares

Various spare parts for a Taito Cocktail cabinet

Stepdown transformer board - The 240v to 110v stepdown was working (used to test monitors) however full functionality wasn't tested

Another transformer - Also working used to to power monitors

DC power supply board - Not working seems to need re-capping

Speaker - Cone broken, sounds bad but works

Fan - Didn't spin

Main pcb connector wiring harness - Seems to have been modified: inputs cut, power changed, connector standard isn't jamma unsure if factory. However dc power and video connectors are still present.

Metal rails to mount the Toei 14" crt

$80

Would be willing to split things if needed.

IMG_4058.thumb.JPG.8b28b833cc16c8477398ede7539a5589.JPG IMG_4061.thumb.JPG.1551f22e337837c9d2405f8aa64735d7.JPG

 

The 14" crt and the taito spares belived to have come from the same cabinet, would be ideal for anyone restoring one.

The monitors were measured as full face not visible area.

If you want more measurements of anything or more pictures feel free to ask.

 

All prices are open to negotiation.

Located in Easturn Suburbs for pickup.

Would be willing to consider posting smaller things but the monitors would need to be picked up.

Cheers

IMG_4047.thumb.JPG.18b52a02fa83ba7262bc140457f8ac75.JPG

IMG_4046.thumb.JPG.d42472a8f980f0ef1f93071396f5271e.JPG

IMG_4050.thumb.JPG.bf5e0938a8113b6595700d596c7eebd9.JPG

IMG_4048.thumb.JPG.2cbdc826f95055d6899ae4716812883c.JPG

IMG_4049.thumb.JPG.471dbe57854db7508026a160b8313f84.JPG

IMG_4056.thumb.JPG.be08154448dbaa6fbe74360cc9d0fb21.JPG

IMG_4055.thumb.JPG.796489a6344795b5ed456c75d9e04655.JPG

IMG_4057.thumb.JPG.d002f42b71674ad05bd46e04b13557e7.JPG

IMG_4059.thumb.JPG.cc3a0bc1ff0e2378cd30c2ed71b3491a.JPG

IMG_4078.thumb.JPG.f2dcb6be04bd79f63bf9aae698001278.JPG

IMG_4062.thumb.JPG.0327c1341f30b303b01518c941fef827.JPG

IMG_4080.thumb.JPG.c77b93f6db191ec9ca3b2dccff3e6f39.JPG

IMG_4045.thumb.JPG.7bb26f7c2d258995c71adcb056a534c8.JPG

IMG_4038.thumb.JPG.905833440437f1efeb1b924bf51d968e.JPG

IMG_4080.thumb.JPG.3b7d8a846faf812c8eeff02ca96e3f58.JPG

IMG_4078.thumb.JPG.6b086023009e06cf4614551d8e9a1b24.JPG

IMG_4045.thumb.JPG.4ac8dcb52daff79a24002ead42c19f09.JPG

Edited by TappityTap
Link to comment
Share on other sites

  • 4 months later...
any chance you could display a cross hatch pattern on the 14 Toei - from taito cocktai ?

 

I'm not sure I can to be honest but I'll look into it. The picture of lady bug was taken on it if that helps. I'd say the geometry is decent but the chassis could use a service.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...