Announcement

Collapse
No announcement yet.

Demolition Man Claw issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Nope that didnít work, it just went left again and hit the side of the cabinet. If that wasnít there I think itíd go around in circles.


    Sent from my iPhone using Aussie Arcade
    Collecting practically anything Mancave (Pinball, Arcade, Toy, Beer & Sport related)
    Over 2000 Sports games on DVD - www.allsportdvd.com

    Comment


    • #17
      Sounds mechanical
      It should not be able to rotate past it’s limits unless something is loose
      I don’t know the machine intimately but I suspect it works similar to a sttng cannon???
      Can you physically move it with your hand with the power off?

      Comment


      • #18
        Yes I can physically move it with the power off.


        Sent from my iPhone using Aussie Arcade
        Collecting practically anything Mancave (Pinball, Arcade, Toy, Beer & Sport related)
        Over 2000 Sports games on DVD - www.allsportdvd.com

        Comment


        • #19
          That doesn't sound right
          Try and work out where is is moving from, there must be something loose

          Comment


          • #20
            Your correct boots you should not be able to move it manually

            Sent from my SM-G950F using Tapatalk

            Comment


            • #21
              You guys mean moving the Claw arm with the gears turning and making that sound?


              Sent from my iPhone using Aussie Arcade
              Collecting practically anything Mancave (Pinball, Arcade, Toy, Beer & Sport related)
              Over 2000 Sports games on DVD - www.allsportdvd.com

              Comment


              • #22
                Perhaps it is time to open the gearbox and check to see everything is OK inside. Maybe a loose gear is contributing to the issues?

                http://www.afpinball.com
                "Pinball... harmless recreation for a modest consideration"

                Comment

                Users Viewing Topic: 0 members and 1 (guests)
                Working...
                X