Announcement

Collapse
No announcement yet.

GnR Start

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GnR Start

    OK.
    Very soon going to start my restore on my Gunners Pin.
    but before I do, does anyone know where I can get the inserts for it. Looking for the ones the spell out Guns N Roses seen here http://www.ipdb.org/showpic.pl?id=1100&picno=10186

  • #2
    Well I've started. Here's the Head box. Slowly but surley does it..








    More pics in my Album..

    Comment


    • #3
      that looks bloody great. I assume you masked up all the art work on the sides - any touch ups. Are you using enamual or acrylic paints?

      Keep the pics soming.

      Comment


      • #4
        Oooh shiney!

        Did you clear coat it over the original paint? Looks nice!

        Comment


        • #5
          very nice work!
          sigpic

          Comment


          • #6
            Get ready:
            Yep everything masked using Tamiya RC masking tape, good stuff and translucent - yellow colour, used a pen knife to cut around the art work.
            Touch ups used with water based paint, black was done with aerosol spray cans!...
            Clear, 2 Pack Automotive clear..

            Comment


            • #7
              that looks better than new- nice work. Keep the updates coming
              Man cannot live with just one pinball.
              sigpic

              Comment


              • #8
                .
                Last edited by BuRNZ; 1st April 2013, 03:43 PM.

                Comment


                • #9
                  She Looks Smick, Well done.

                  DK

                  Comment


                  • #10
                    I also see the iron-on wood trim. After you posting that tip I have done it to 2 of my cabs and it comes up great.
                    Man cannot live with just one pinball.
                    sigpic

                    Comment


                    • #11
                      Originally posted by Shock_And_Awe View Post
                      I also see the iron-on wood trim. After you posting that tip I have done it to 2 of my cabs and it comes up great.
                      Good eyes, I can;t speak highly enough of doing this. Makes the edge 100% more presentable....

                      One silly thing I've done is lost all the photos of the headbox boards with the plugs... Doh
                      Last edited by Savage; 15th November 2008, 08:46 PM.

                      Comment


                      • #12
                        Very, Very nice...

                        Keep the updates coming.
                        We are the largest supplier of Pinball Ramps in Australia.
                        Distributors for CPR, Pinball Inc, Planetary Pinball, Starship-Fantasy, Ball Baron, Pincore, Cliffy Protectors, Superbands
                        http://http://www.rtbb.com.au/
                        http://https://www.facebook.com/RideTheBoneyBeast

                        Comment


                        • #13
                          Originally posted by Savage View Post
                          Good eyes, I can;t speak highly enough of doing this. Makes the edge 100% more presentable....

                          One silly thing of done is, lost all the photos of the headbox boards with the pugs... Doh


                          Can you point out pic and exactly what is achieved...im a dummy
                          Pinball Meets...I love em

                          Comment


                          • #14
                            Originally posted by Savage View Post
                            Get ready:
                            Yep everything masked using Tamiya RC masking tape, good stuff and translucent - yellow colour, used a pen knife to cut around the art work.
                            Touch ups used with water based paint, black was done with aerosol spray cans!...
                            Clear, 2 Pack Automotive clear..
                            I bow to the 2pack master.

                            Comment


                            • #15
                              Looks great, came up really good
                              "Beer, it does a belly good!"

                              Wanted: Pacman Cab Next Project: Skinny MAME Cab for Samfoot, thread soon, no really. I might even do one on my Pole Position cab!

                              Comment

                              Users Viewing Topic: 0 members and 1 (guests)
                              Working...
                              X