poora Posted February 26, 2018 Share Posted February 26, 2018 Hello all, First post on the forum! I initially joined up because im planning to build a mame box yet here I am posting about repairing an old SNES i decided to dust off and play. I recently tried playing my old SNES and the two games I tried had scrambled graphics. In Mortal Kombat i could see the background but not the sprited. In Mario all stars I could only see the sprite and no background. I gave both a clean with isopropyl without much luck. I also tried cleaning the SNES cartridge. I've been reading that it could be the PPU? I also have a Super UFO Pro 7 that isnt displaying. Not sure if its the snes or this unit. When i plug in the power adaptor it makes a short noise then stops. The floppy LED doesnt light up either. I've google repairers in Melbourne but havent had much luck. I'd repair it myself but my soldering skills are absolutely rubbish and given his was my first console I'd prefer not to destroy it for good! If theres anyone here who can point me in the right direction that would be great. Cheers, Trev Link to comment Share on other sites More sharing options...
darkjedi Posted February 26, 2018 Share Posted February 26, 2018 Could be any number of things, but if it's been stored for a bit you may have gunk built up below the cartridge connector that'll need to be cleaned out. First up, get the system opened up, and remove all the screws from the RF shielding and on either side of the cartridge connector. First, check the version number in the bottom-right of the board and see what it is. If it says 1CHIP, then what I'm going to suggest won't be possible: If it's not a 1CHIP, take a look at the bit I've circled in red below. The top half of the cartridge connector can be removed on the non-1CHIP versions of the SNES fairly easily, so give it a bit of a wiggle & upward force and it'll pop off. Once you've got it off, use a toothbrush soaked in isopropyl to scrub all the pins on both sides of the connector fairly well. once you've hit all the exposed bits of the cartridge connector and it's dried, replace the top-half of it and test a game to see if it's improved any. If not, take a look at my thread on Twitter from a while back when I fixed some graphical issues being caused by corroded traces & check the areas I mention - Good luck! Link to comment Share on other sites More sharing options...
poora Posted February 26, 2018 Author Share Posted February 26, 2018 Great tip. Thanks alot! I can manage dismantling and reassembling more than soldering so lools like I have something to do this weekend. Link to comment Share on other sites More sharing options...
Rustler77 Posted March 6, 2018 Share Posted March 6, 2018 Hi poora How did you go with this one? From my experience a good cartridge and cartridge slot clean will do the trick but if you do discover it has corroded traces I’d be happy to help with soldering. Link to comment Share on other sites More sharing options...
poora Posted March 14, 2018 Author Share Posted March 14, 2018 Hey Rustler. I ended up having to order the tool and havent got around to it. I hit up a retro console repairer just incase it doesn't work. I'm hoping to take it apart this week and will take some pics while im at it. Link to comment Share on other sites More sharing options...
poora Posted March 18, 2018 Author Share Posted March 18, 2018 Hey Rustler. I ended up having to order the tool and havent got around to it. I hit up a retro console repairer just incase it doesn't work. I'm hoping to take it apart this week and will take some pics while im at it.Opened it up and gave the cartridge a good scrub along with a couple of cartridges but no deal. There's not noticeable leaks around the caps although theres a yellow substance is the corner next to the the rear inputs. To my untrained eyes theres also no corrosion. I've attaches some pics. Cheers. Sent from my LG-H930 using Tapatalk Link to comment Share on other sites More sharing options...
darkjedi Posted March 18, 2018 Share Posted March 18, 2018 Can you get a better shot of this IC? Link to comment Share on other sites More sharing options...
poora Posted March 25, 2018 Author Share Posted March 25, 2018 Yep will do. Sorry, been busy setting up my mame box. I put tge snes back together will will try to take it apart this week before easter. What are you thinking with that IC? Sent from my LG-H930 using Tapatalk Link to comment Share on other sites More sharing options...
darkjedi Posted March 25, 2018 Share Posted March 25, 2018 could be the photo, but looks like something's funky with the legs on it. Link to comment Share on other sites More sharing options...
Frank_fjs Posted March 25, 2018 Share Posted March 25, 2018 You thinking fifth and sixth legs from bottom left? I spotted that too. Link to comment Share on other sites More sharing options...
darkjedi Posted March 25, 2018 Share Posted March 25, 2018 Yup. Could be dust, but worth checking! Link to comment Share on other sites More sharing options...
poora Posted April 14, 2018 Author Share Posted April 14, 2018 Yup. Could be dust, but worth checking!Hi guys, Finally managed to take some new pics. Its definitely not dust. It looks like the legs are a bit corroded and from side on they look like they've been pushed down. Cheers. Sent from my LG-H930 using Tapatalk Link to comment Share on other sites More sharing options...
NEO-GEO Man Posted April 21, 2018 Share Posted April 21, 2018 Hi guys, Finally managed to take some new pics. Its definitely not dust. It looks like the legs are a bit corroded and from side on they look like they've been pushed down. Cheers. Sent from my LG-H930 using Tapatalk Its possible, but unlikely. Get some good solder paste and a flux pen, clean it all up with the flux pen, dry it all off, put some solder paste along the pins and hit it with hot air. The paste will melt and go straight to the pads and legs, giving a nice clean joint on all legs. Link to comment Share on other sites More sharing options...
poora Posted May 10, 2018 Author Share Posted May 10, 2018 Sorry just saw this post. That sounds pretty straight forward to do. Any online stores you'd recommend? Sent from my LG-H930 using Tapatalk Link to comment Share on other sites More sharing options...
Frank_fjs Posted May 10, 2018 Share Posted May 10, 2018 Jaycar, R14, RS. Link to comment Share on other sites More sharing options...
NEO-GEO Man Posted May 10, 2018 Share Posted May 10, 2018 Jaycar, R14, RS. Also add element 14 Link to comment Share on other sites More sharing options...
poora Posted May 10, 2018 Author Share Posted May 10, 2018 Excellent thanks guys. Sent from my LG-H930 using Tapatalk Link to comment Share on other sites More sharing options...
NEO-GEO Man Posted May 11, 2018 Share Posted May 11, 2018 Excellent thanks guys. Sent from my LG-H930 using Tapatalk No worries mate ;) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now