Announcement

Collapse
No announcement yet.

Restoration tip needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Restoration tip needed

    Looking for some direction to repair this broken section above the coin op

    thanksClick image for larger version

Name:	Cruisin Coin.jpg
Views:	1
Size:	93.5 KB
ID:	1874655
    If scientists were ever going to figure out how to travel through time, wouldn’t we now be seeing people from the future?

  • #2
    What I would do.

    Sand it all down (preferably with an orbital sander) otherwise by hand.

    Go to super cheap or a Automotive paint supplier and by a fibre glass repair kit.
    Roughen / sand the inside and apply the fibre glass strips and then the resin

    Once hardened use auto filler (car bog) and apply on the outside.
    Sand and re-apply filler if needed.
    When cured, sand with 240 grit or lower to get most of it down flat, then sand with a finer grade like 400 dry.

    Use Primer filler (not just primer) all over the outside.
    Nice even coats, do about 3 or 4.

    Allow a few days to properly dry.
    (use black paint lightly over for a guide coat)

    Then sand with wet and dry 400 grit sand paper, until black paint is gone.

    re do the black guide paint
    re-sand with 800 grit.

    Then paint.

    Comment


    • #3
      Hey mate. I'm sure there was some one on here that had a few nos ones. Try searching the forum , or maybe a member remembers

      - - - Updated - - -

      http://www.aussiearcade.com/showthre...highlight=Dash




      Gibo is your man

      Comment


      • #4
        Gibo, Can you help out here?
        If scientists were ever going to figure out how to travel through time, wouldn’t we now be seeing people from the future?

        Comment

        Users Viewing Topic: 0 members and 1 (guests)
        Working...
        X