Some Easy to understand I-Pac / J-Pac / Pac drive / Opti Pac / Mini Pac Guides

[mlwood37]

I have been working on some easy to understand guides for some other users on how to install some different PCB's for Mame systems and Jamma Arcade systems. Thought id post them here in case some one may find a use for them. Ill add more as i make them ...

 

I-Pac

 

http://i380.photobucket.com/albums/oo244/mlwood2008/ipac2_top1.jpg

 

J-Pac

 

http://i380.photobucket.com/albums/oo244/mlwood2008/MicroSwitch1.jpg

 

Opti-Pac

 

http://i380.photobucket.com/albums/oo244/mlwood2008/optipac.jpg

 

Pac-drive LED PCB[/b]

 

http://i380.photobucket.com/albums/oo244/mlwood2008/pacdrive_12v.jpg

 

Mini-Pac

 

http://i380.photobucket.com/albums/oo244/mlwood2008/mini_board_JandButtons-1.jpg

http://i380.photobucket.com/albums/oo244/mlwood2008/mini_board_R_Spinner-1.jpg

 

Mini - Pac Wiring Guide

 

By Mayhem

 

40 Pin Connector x = polarizing Key

________________________________________________________________

 

-- 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 --

-- x 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 --

________________________________________________________________

 

40 Pin Connector numbered - X = polarizing Key

 

_________________________________________________________________

-- 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 --

-- X 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 --

_________________________________________________________________

 

 

Connector Pin 40, Ground 1 (Optical Only)

[Not used] Pin 39

Trackball X TX1 Pin 38

Trackball X Ground 1 (Power harness)

Trackball X +5v 1 (Power harness)

Trackball X TX2 Pin 37

Trackball Y TY1 Pin 36

Trackball Y Ground 2 (Power harness)

Trackball Y +5v 2 (Power harness)

Trackball Y TY2 Pin 35

Spinner data Pin 34

Spinner data Pin 33

Spinner Ground 3 (Power harness)

Spinner +5v 3 (Power harness)

Top Colour Group Mouse Left Grey Pin 32

Mouse Right Purple Pin 31

Coin-P1 Black Pin 30

Coin-P2 White Pin 29

Start-P1 Red Pin 28

Start-P2 Brown Pin 27

P1 Left Yellow Pin 26

P1 Right Orange Pin 25

P1 Up Blue Pin 24

P1 Down Green Pin 23

P1 Switch 1 Grey Pin 22

P1 Switch 2 Purple Pin 21

P1 Switch 3 Black Pin 20

P1 Switch 4 White Pin 19

P1 Switch 5 Red Pin 18

P1 Switch 6 Brown Pin 17

P2 Left Yellow Pin 16

P2 Right Orange Pin 15

P2 Up Blue Pin 14

P2 Down Green Pin 13

P2 Switch 1 Grey Pin 12

P2 Switch 2 Purple Pin 11

P2 Switch 3 Black Pin 10

P2 Switch 4 White Pin 9

P2 Switch 5 Red Pin 8

P2 Switch 6 Brown Pin 7

P1 Switch 7 Yellow Pin 6

P1 Switch 8 Orange Pin 5

P2 Switch 7 Blue Pin 4

P2 Switch 8 Green Pin 3

Ground Grey Pin 2

Polarizing “Key” Pin (not used) Pin 1

 

10 Pin Connector x = polarizing Key

 

___________________

-- 0 0 0 0 0 --

-- x 0 0 0 0 --

___________________

 

10 Pin Connector numbered - X = polarizing Key

 

____________________

-- 2 4 6 8 10 --

-- x 3 5 7 9 --

____________________

 

X = polarizing Key

2 = +5 Volts (3)

3 =

4 =

5 = Ground (3)

6 = Ground (2)

7 = +5 Volts (2)

8 = +5 Volts (1)

9 =

10 =

 

 

Jamma ASD

 

http://i380.photobucket.com/albums/oo244/mlwood2008/scheda-1.jpg

Edited March 25, 2009 by mlwood37

[AdamC]

Nice guide. :023:

 

This will be very handy.

[mlwood37]

Jamma ASD Done as per req off another forum.

[Crafty]

Very Nice write up. look forward to more additions.

[mlwood37]

I just realized i messed up the Htz signal on Jamma asd. Will wort that out lol ... Now corrected and updated with more info Edited March 23, 2009 by mlwood37