Announcement

Collapse
No announcement yet.

Guide for adding 12Volts to a JPac

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Guide for adding 12Volts to a JPac

    Was looking around for a simple solution to add 12v to my MAME setup, (for a mono amp) and found this mod for the JPAC.
    Nice and simple and puts the 12v in a convenient spot.

    http://mame.3feetunder.com/jpacmod/

    WARNING : Always make sure the Jamma plug is the correct way around to the JPAC if leaving the PSU plugged in. As 12v to the wrong part will damage the JPAC
    sigpic
Users Viewing Topic: 0 members and 1 (guests)
Working...
X