Announcement

Collapse
No announcement yet.

Powering a 48-in-1 - PROBLEMS!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Powering a 48-in-1 - PROBLEMS!

    Hey guys,

    I ducked into town today to grab a new PC power supply for my cocktail that i'm building. When it came to powering up the unit the monitor and speakers we definitely on, but i can for the life of me figure out why the 48-in-1 isnt booting up...

    I haven't wired up any buttons yet, as i just wanted to make sure the screen was working, would this affect anything?

    And the cabinet is powered by a PC power supply, and not an actual Arcade PSU.

    Do i need to wire a button that tells the PSU to turn on?

    Any help would be great guys...

    If you need more information, just let me know!!

    Cheers,

    el_timbo86

  • #2
    Hi,

    If your using an ATX power supply you need to bridge the
    Green wire of the power supply to Ground (one of the Black wires)
    Attached Files
    Last edited by Gamemasters; 30th December 2008, 03:01 PM. Reason: added diagram

    Comment


    • #3
      Originally posted by Gamemasters View Post
      Hi,

      If your using an ATX power supply you need to bridge the
      Green wire of the power supply to Ground (one of the Black wires)
      THANKS GAMEMASTERS!!!

      I can keep going now! Thanks for the speedy response too.

      Comment

      Users Viewing Topic: 0 members and 1 (guests)
      Working...
      X