Announcement

Collapse
No announcement yet.

Distorted screen and smoke

Collapse

Dead monitor? something dosent look right on the screen? monitor repair questions here.

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Distorted screen and smoke

    I have a Gottlieb low boy ???
    Moved it a couple of days ago . Turned it on today and see pic below , the screen is all haywire. Then the dreaded electrical smell and smoke coming from the area in pic 2. It has a 60in1 board and I know jack s__t about these things. Pinball yes arcade no. Any ideas ?

    Sent from my SM-G950F using Tapatalk

  • #2
    Good chance the yoke has fried.

    What chassis is it?

    Comment


    • #3
      Looks like the brown glue strikes again. It corrodes the copper windings. If u take the yoke off you'll probably see.

      Comment


      • #4
        Ok whats the yoke ?

        Sent from my SM-G950F using Tapatalk

        Comment


        • #5
          The part in your photo with the yellow/blue etc wires attached to it on the neck of the tube.

          Comment


          • #6
            Ok will check it out tomorrow. If its cooked what then ?

            Sent from my SM-G950F using Tapatalk

            Comment


            • #7
              Originally posted by Johns-Arcade View Post
              Good chance the yoke has fried.

              What chassis is it?
              Thanks for your reply John , as I said I know nothing about this so what is the chassis

              Sent from my SM-G950F using Tapatalk

              Comment


              • #8
                Originally posted by Plong View Post
                Thanks for your reply John , as I said I know nothing about this so what is the chassis

                Sent from my SM-G950F using Tapatalk
                The circuit board thats connected to the monitor (one on end od tube is a neckboard)

                Lcd is a option with a 60in1 as replacement too
                you can always expect change in life..except from vending machines

                Comment

                Users Viewing Topic: 0 members and 1 (guests)
                Working...
                X