Welcome to the Aussie Arcade forums. For 15 years Aussie Arcade has been in the forefront on promoting the Pinball and Video Arcade hobby. Other topics include repair and restoration of Pinball and Arcade machines, retro computers and consoles, jukeboxes and much more.
Aussie Arcade is also home to the Mame Gaming League and Visual Pinball League two great competitions you can participate in.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process, account login or need to reactivate an old account please contact us.
*IMPORTANT* If you have not received your verification email please check your anti spam settings and junk mail folders before contacting the Admin. The verification email can take up to 10-15 minutes to arrive. *IMPORTANT* If you are having trouble resetting your password with the link provided use the code instead. Some email clients do not format the link correctly. The code must be used before the link to work, if you have already used the link it will invalidate the code and you will have go through the process again.
just brought a nri coin mech for my neo geo 4 slot, when i hooked it up it will take 20c, $1, $2 but will only register 20c coins.
could some one tell me the pinout for the LAI credit board so i can check my setup, and what the dip switch in the NRI coin mech is set to
i have been on the sunrise credit board web site but dont know which credit board to look for?
The factory settings for $1 per play are as follows 1;ON 2;ON 3;OFF 4;ON. For 60c per play 1;ON 2;ON 3;ON 4;OFF.
Also a bit of information that might be helpful, i'm reading this off the paperwork iv'e got.
Should the credit pcb become faulty the LED will flash on and off. A short flash when power is applied is normal,
with the LED being off when operating correctly.
the dip switch on the credit board has 8 settings and the one inside the nri coin mech has 6, what settings are you referring to that only has 4 settings?
the dip switch on the credit board has 8 settings and the one inside the nri coin mech has 6, what settings are you referring to that only has 4 settings?
The dip settings on the credit board. Have the rest set to the off position. If your still after the pinout pm me your email and i'll send you what iv'e got over the weekend.
Tweet
Comment