Announcement

Collapse
No announcement yet.

Electromechanical coin counter

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Electromechanical coin counter

    On the inside of one of the cabinets there is a electromechanical coin counter that looks like a odometer from a car speedo.when coins are registered to cash box, the increments the counter.Its black and about 1.5 inches wide, and about 2 inches deep and counts to 999999 and has 2 wires to it.
    Where do i get these from?
    Im chasing 2 of them
    rc forums looking for cabinet pc atx power supply for 12/5 volt for mame cabinet and turn it on
    if your new to electronics and

  • #2
    Originally posted by dezrae View Post
    On the inside of one of the cabinets there is a electromechanical coin counter that looks like a odometer from a car speedo.when coins are registered to cash box, the increments the counter.Its black and about 1.5 inches wide, and about 2 inches deep and counts to 999999 and has 2 wires to it.
    Where do i get these from?
    Im chasing 2 of them
    pm me your addy i got 2 you can have they are not at 00000 thouth
    The best action is wrist action!!!!!!

    Comment


    • #3
      I have to ask..why do you want to put one in ? Pretty redundant in a home cab
      Beer....the reason I get up every afternoon.

      Comment


      • #4
        i want to put them back in cos im going to make the cabs take 20cent pieces, just like they did when i was a kid.

        my kids dont believe me i used to pay 20 cent a game, they are used to seeing their pocket money disappear after 3 games playing at 2bucks a game at the arcade.

        also makes for an interesting piggybank the mame cabinet.

        Thank you davefjedi i will pm you now
        rc forums looking for cabinet pc atx power supply for 12/5 volt for mame cabinet and turn it on
        if your new to electronics and

        Comment


        • #5
          just be careful with these Dez - I had one in my cocktail and it had shorted - and with it i blew up two power supplies - they are essentially a solenoid stepper that increments the counter when you insert the coin - whilst I appreicate they add some authenticity to a game they can also cause costly problems for your game
          Ric
          looking for:
          the baseboard for a Gottlieb Royal Guard
          Zaccaria Devil Riders Backglass
          Williams OXO, GTB Volcano

          Comment


          • #6
            Whack an IN4007 diode across the coil to eliminate back emf and you should be fine. Do you intend on driving it from your PC (via an interface!) or does your coinmech have a drive line?
            Q.Are we not men? A.We are DEVO!

            Comment

            Users Viewing Topic: 0 members and 1 (guests)
            Working...
            X