Announcement

Collapse
No announcement yet.

help to identify boards

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • help to identify boards

    Just wondering if anyone has any idea what these 4 non jamma boards may be.
    1. S/N 19244 on sticker, 2 boards with 2 very small boards attached to each, 44 pin.
    2. 2 boards,no markings, 44 pin.
    3. A-17 printed on board near connector, 44pin.
    4. 2 boards,sticker says 000902, KGR-A printed at top, 56 pin.
    thanks
    Brett
    Last edited by bretty; 23rd April 2007, 09:22 PM.

  • #2
    Here is a guide that may help.......but you need to know a little about electronics to use it

    http://www.mikesarcade.com/cgi-bin/s...own-boards.txt

    Comment


    • #3
      First one is rally X, fouth one is kangaroo bootleg. Other two no idea

      Comment


      • #4
        I find this site handy:

        http://arcadecollecting.xmission.com/pcbpics/

        Cheers,
        Xygt

        Comment


        • #5
          Thanks Trav,2 down 2 to go.

          Comment


          • #6
            Why don't you just use http://coinop.org/RomId.aspx All you need to do is just read one of the eproms, save it to file, upload it to the site and search It will tell you what board/game the eprom belongs to.
            WANTED

            Another Holiday
            .

            Comment


            • #7
              I think the reason Bretty posted the thread was because he doesnt have a eprom programmer.

              The best way I find is reading a rom then using clr mame pro to identify.

              Comment


              • #8
                Nah dont have an eprom programmer nor would I know how to use it if I did.
                Just hoped somebody may have same board or could hazard an educated guess.

                Comment


                • #9
                  next time im in adeliade im gonna pm ya for some Kanga action dude
                  The best action is wrist action!!!!!!

                  Comment


                  • #10
                    Probibly best to find some one with a programer, Send them some chips, they ID them, Then return the chips!

                    Mrv.


                    Originally posted by bretty
                    Nah dont have an eprom programmer nor would I know how to use it if I did.
                    Just hoped somebody may have same board or could hazard an educated guess.

                    Comment


                    • #11
                      Just buy one http://cgi.ebay.com/Dual-Power-Unive...QQcmdZViewItem

                      Cheapest on the market and a good starting point for anyone.
                      WANTED

                      Another Holiday
                      .

                      Comment


                      • #12
                        Or ask someone that lives down the road from you to dump the roms so you can check them in Romident

                        Comment


                        • #13
                          Originally posted by xygt
                          Or ask someone that lives down the road from you to dump the roms so you can check them in Romident
                          Is that an offer xygt ?
                          Not sure about the kanga action davefjedi.Maybe you Brissy boys like it but not down here
                          Sorry I take that back,make that Victorians!
                          Last edited by bretty; 13th August 2006, 10:20 PM.

                          Comment


                          • #14
                            pcb #2 is "Stinger" and pcb #3 is "Bank Panic"

                            Comment


                            • #15
                              I found this bootleg pcb in my shed and dont know what it is.
                              Attached Files
                              Last edited by staceyamusements; 13th January 2010, 08:20 PM.
                              Doggistyler

                              Comment

                              Users Viewing Topic: 0 members and 1 (guests)
                              Working...
                              X