VPGL 15 - Post Pass - Rules

Hi Pinballers,

Welcome to arcade gaming competition with VPGL 15. This tournament is the 3rd of the new decade and part of the overall VPGL 2020 and all gamers worldwide are welcome to play. You can join in at any time and play.

The player with the most points...

MGLXLIV - Arcade Runner - RULES

Hi Gamers,

Welcome to arcade gaming with MGLXLIV - Arcade Runner. This is the second tournament of the WORLD CHAMPIONSHIP OF ESPORTS for 2020. All gamers worldwide are welcome to game. You can also join in at any time.

Please watch the trailer below for the official...

Gottlieb Sea Belles August 1956

gottlieb sea belles 1956

so, how many years does it make her?

bill picking up a project in the next few days, a very dirty, neglected old 50s woody.

so good these are still out there, though very rare now.

lets start with the new playfield plastics...

Announcement: Western Australia set to have its very own Pinball Festival

Hi folks!

We’d like to share some exciting news with you all…

Western Australia is set to have its very own Pinball Festival 😊

With Western Australia starting to ease restrictions from tomorrow, we thought what better time to announce plans for a pinball festival...

Monster Bash...Classic Edition

Finally after a couple of months ploughing through our house extensions, I'm back in my favourite room of the house!

Next in line is my custom Monsterbash I've been planning for a long time. Paying hommage to the 1950s Universal monsters going with a black and white theme and lots of custom...

How game board components work

This will be a series of posts on how specific components work on a game board. Its purpose is to help you understand how the circuitry works. Feel free to add to the series if there's a topic you want to cover.

First up: Reset!

You'll typically see the signal defined as RESET...


No announcement yet.

Wiring Help: Decent Loom, Switches?

  • Filter
  • Time
  • Show
Clear All
new posts

  • Wiring Help: Decent Loom, Switches?

    Hey guys,

    So I picked up this kit from eBay for my first project. Whole cab is done minus the controls. A few buttons didn't work after my first attempt but I wasn't too fussed. I was happy to keep at it until I got it wired correctly but upon attempting to remove the wires from the switches, I've had three wires pull out from the crimp. I wasn't tugging at the wire, either. I was either using my fingers or pliers on the actual crimp to attempt to pull it free from the switches.

    Question today is can anyone recommend a decent loom or switches? I already have everything in the kit linked in the eBay link above minis some cables due to the above reason. Hopefully one that can be removed easily so I can have more attempts at wiring without rendering a big chunk of wire useless. I don't have a soldering iron to repair my currently broken wires.

Users Viewing Topic: 0 members and 1 (guests)