MadMikeAU Posted February 11, 2006 Share Posted February 11, 2006 Anyone got a Megatech PCB or the carts? Anyone got the pinout for the carts? Link to comment Share on other sites More sharing options...
The Pinny Parlour Posted February 11, 2006 Share Posted February 11, 2006 SEGA MEGA TECH Manufacturer: Sega Year: 1989 Connector CN1 (Lamp) Use Molex 12 Pin 0.100" Header |-----|------------| | Pin | Definition | |-----|------------| | 1 | I.1 | | 2 | I.2 | | 3 | I.3 | | 4 | I.4 | | 5 | N/C | | 6 | N/C | | 7 | N/C | | 8 | N/C | | 9 | N/C | | 10 | N/C | | 11 | N/C | | 12 | N/C | |-----|------------| Connector CN2 (Select) Use Molex 25 Pin 0.100" Header |-----|------------| | Pin | Definition | |-----|------------| | 1 | Select * | | 2 | N/C | | 3 | N/C | | 4 | N/C | | 5 | Door SW 1 | | 6 | Door SW 2 | | 7 | N/C | | 8 | Test * | | 9 | A.1 | | 10 | A.2 | | 11 | A.3 | | 12 | A.4 | | 13 | Service * | | 14 | Enter * | | 15 | +5VDC | | 16 | +5VDC | | 17 | N/C | | 18 | Coin Meter | | 19 | N/C | | 20 | Ground | | 21 | Ground | | 22 | Ground | | 23 | Ground | | 24 | Ground | | 25 | Com A | |-----|------------| Connector CN3 (Sound) Use Molex 4 Pin 0.100" Header |-----|-------------------| | Pin | Definition | |-----|-------------------| | 1 | Left Speaker (+) | | 2 | Left Speaker (-) | | 3 | Right Speaker (+) | | 4 | Right Speaker (-) | |-----|-------------------| Connector CN4 (1P) Use Molex 10 Pin 0.100" Header |-----|-------------| | Pin | Definition | |-----|-------------| | 1 | 1P Up * | | 2 | 1P Down * | | 3 | 1P Left * | | 4 | 1P Right * | | 4 | 1P Shot 1 * | | 6 | 1P Shot 2 * | | 7 | 1P Shot 3 * | | 8 | 1P Start * | | 9 | Ground | | 10 | Ground | |-----|-------------| * Wired as NO (Normally Open) Connector CN5 (Gun) Use Molex 21 Pin 0.100" Header |-----|------------| | Pin | Definition | |-----|------------| | 1 | | | 2 | | | 3 | | | 4 | | | 5 | | | 6 | | | 7 | | | 8 | | | 9 | | | 10 | | | 11 | | | 12 | | | 13 | | | 14 | | | 15 | | | 16 | | | 17 | | | 18 | | | 19 | | | 20 | | | 21 | | |-----|------------| Connector CN6 (Power) Use Molex 14 Pin 0.100" Header |-----|------------| | Pin | Definition | |-----|------------| | 1 | +5VDC | | 2 | +5VDC | | 3 | +5VDC | | 4 | +5VDC | | 5 | N/C | | 6 | Ground | | 7 | Ground | | 8 | Ground | | 9 | Ground | | 10 | Ground | | 11 | Ground | | 12 | N/C | | 13 | +12VDC | | 14 | +12VDC | |-----|------------| Connector CN7 (2P) Use Molex 11 Pin 0.100" Header |-----|-------------| | Pin | Definition | |-----|-------------| | 1 | 2P Up * | | 2 | 2P Down * | | 3 | 2P Left * | | 4 | 2P Right * | | 5 | 2P Shot 1 * | | 6 | 2P Shot 2 * | | 7 | 2P Shot 3 * | | 8 | 2P Start * | | 9 | Ground | | 10 | Ground | | 11 | N/C | |-----|-------------| * Wired as NO (Normally Open) Connector CN8 (RGB1) - Main Monitor Use Molex 6 Pin 0.100" Header |-----|-----------------| | Pin | Definition | |-----|-----------------| | 1 | Video Red (+) | | 2 | Video Green (+) | | 3 | Video Blue (+) | | 4 | Video Sync (-) | | 5 | Ground | | 6 | N/C | |-----|-----------------| Connector CN9 (RGB2) - Secondary Monitor Use Molex 5 Pin 0.100" Header |-----|-----------------| | Pin | Definition | |-----|-----------------| | 1 | Video Red (+) | | 2 | Video Green (+) | | 3 | Video Blue (+) | | 4 | Video Sync (-) | | 5 | Ground | |-----|-----------------| By: Kevin Eshbach Link to comment Share on other sites More sharing options...
MadMikeAU Posted July 18, 2006 Author Share Posted July 18, 2006 Got my MegaTech up and happening. At the moment, SELECT is P1-Button4 :unsure Note the monitor on top of the cab, ready to become the menu/instructions screen. I have 4 carts at the moment... Columns = :unsure Great Golf = :sleep Super Thunder Blade = :023: even matches the marquee :D World Championship Soccer = :078: I have Shinobi on the way. That leaves 3 empty slots :cry. Anybody have any of these gems? Ultimately, I want to buy/build a MegaTech cab. They are the coolest looking upright cabs ever made. But, no room at the moment. I am looking to move like next year (maybe earlier), then I will have room. Link to comment Share on other sites More sharing options...
The Pinny Parlour Posted July 18, 2006 Share Posted July 18, 2006 Nice, Nice, Nice. Did I say nice? :) Link to comment Share on other sites More sharing options...
MadMikeAU Posted August 6, 2006 Author Share Posted August 6, 2006 I just noticed that by wiring up the ENTER button, you can view each game's instructions on the small monitor. :o Very nice indeed !!! Piy I dont have a second monitor happening yet. I went to tricky dicky's for a sync separator chip, and came home with a fistfull of video encoder chips (for 10c each :D). Gonna hook up a small TV there instead, me hinks. Link to comment Share on other sites More sharing options...
GameDude Posted August 9, 2006 Share Posted August 9, 2006 Pretty sure I have E-SWAT and Golden Axe... If you want them send me an offer either PM or email dorian@gamedude.com.au Link to comment Share on other sites More sharing options...
MadMikeAU Posted September 28, 2006 Author Share Posted September 28, 2006 Second monitor issue solved ... http://www.aussiearcade.com/showthread.php?p=30097#post30097 Now, more carts needed :D Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now