Announcement

Collapse
No announcement yet.

Taito cocktail legs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Taito cocktail legs

    hello gents.....

    still trying to track down a set of legs for my taito cocktail
    http://www.aussiearcade.com/showthre...taito+cocktail
    its like the one in the link above!!!

    can anyone point me in the direction of someone who could help?
    dont mind if its repo (if there is such a thing), they need cleaning up etc?

    i have this cocktail without a lid or legs lying in the shed....
    if i cant find any legs to make a start on restoring it ill be trying to either sell it or give it away

    plz help

  • #2
    what about looking for a old 70's coffee table

    legs are very similar on those and usually free
    you can always expect change in life..except from vending machines

    Comment


    • #3
      Originally posted by narf View Post
      what about looking for a old 70's coffee table

      legs are very similar on those and usually free
      hmmm u know thats not a bad idea.... thinking outside the square i like it!!!

      although personally id prefer to just be handed legs on a silver plate

      Comment


      • #4
        anyone else ???

        Comment


        • #5
          It's hard to see the legs in such a small picture, but can you get them made? I have a mate here that makes stuff all the time and he reakens they shouldn't be to hard.
          That's the way Max Power is. Decisive. Uncompromising! And rude!

          Comment


          • #6
            Originally posted by maxpower View Post
            It's hard to see the legs in such a small picture, but can you get them made? I have a mate here that makes stuff all the time and he reakens they shouldn't be to hard.
            k here is another pic
            http://www.aussiearcade.com/attachme...0&d=1206104909

            Comment


            • #7
              Was joking about the picture. It's huge. Anyway i'm sure that someone will make those. Any steel shop would do them. I live in a small town 10,000ish people and there are like 5 places that do welding and steel work here. I dont think it would cost much and then get them powder coated or chromed.
              That's the way Max Power is. Decisive. Uncompromising! And rude!

              Comment


              • #8
                I priced it all up once for the taito cabinet I restored, but fortunately the one I had was tarnished, covered in bubble gum, milkshakes, beer, etc. A rub with some soapy water and steel wool brought the chrome up looking like they were new!

                The price for the metal guy to make them up, send them off to be chromed, etc was rediculous.

                I also tried to get the glass clips for the same cabinet re-made / chromed. I only had 1 with the cabinet and needed a nice set of 4.

                If anybody has a set of 4 nice shiny glass clips to suit a taito cocktail cabinet send me a PM with the price your asking.

                Intigod: If you are still looking for the legs, flick me a PM and I will put you in contact with a dude who will have them.
                Retired

                Comment


                • #9
                  Originally posted by biggeorge View Post
                  I priced it all up once for the taito cabinet I restored, but fortunately the one I had was tarnished, covered in bubble gum, milkshakes, beer, etc. A rub with some soapy water and steel wool brought the chrome up looking like they were new!

                  The price for the metal guy to make them up, send them off to be chromed, etc was rediculous.

                  I also tried to get the glass clips for the same cabinet re-made / chromed. I only had 1 with the cabinet and needed a nice set of 4.

                  If anybody has a set of 4 nice shiny glass clips to suit a taito cocktail cabinet send me a PM with the price your asking.

                  Intigod: If you are still looking for the legs, flick me a PM and I will put you in contact with a dude who will have them.
                  Gamedude (Dorian) sells cocktail glass clips I am sure. They may be just balck though ($19). Anyway have a look at his site and see what he has.
                  I have no garage!

                  Comment


                  • #10
                    for clips i did have about 15 odd sets once

                    i do have some original taito ones but they need some good loving to get back to normal

                    if you need CP plates i also have some original unused 80's stock (still heat wrapped)
                    you can always expect change in life..except from vending machines

                    Comment


                    • #11
                      Originally posted by narf View Post
                      for clips i did have about 15 odd sets once

                      i do have some original taito ones but they need some good loving to get back to normal

                      if you need CP plates i also have some original unused 80's stock (still heat wrapped)
                      Hey Narf,
                      Can you put up a photo and price of those CP plates. I may be interested in them if no one else is. Cheers,
                      Ian
                      I have no garage!

                      Comment


                      • #12
                        Narf, I know its a while ago but did you ever get rid of those CPs? If not, I might be interested. Which game do they belong to?

                        Comment


                        • #13
                          you can get the clips here
                          http://www.in2amusements.com.au/shop...er_Clips_Retro

                          Comment


                          • #14
                            Originally posted by dungbeetle46 View Post
                            and the legs from the same spot. Jason (jaspar) is a great bloke and always willing to help.

                            http://www.in2amusements.com.au/shop...de_Legs_(Pair)
                            sigpic

                            For all your promotional requirements at guaranteed low prices ....
                            CUSTOM MADE PHONE COVERS, STUBBY COOLERS, KEYRINGS,
                            LANYARDS, WRISTBANDS plus MUCH, MUCH MORE !!!!!!

                            Comment

                            Users Viewing Topic: 0 members and 1 (guests)
                            Working...
                            X