Aussie Arcade
  • MUDGEE NSW is starting a small pinball weekly pinball comp..

    Welcome fellow AAs..i am assisting in the set up of a weekly/ fortnightly pinball comp in mudgee nsw..
    We have the local paper doing a small write up on this , and hopefully a pic as well to be in the local paper, the local paper will be there this thursday at midday.
    So anybody in the area is more than welcome to come along on thursday midday, to mr dykes trophies and records store in the mortimer centre in town..
    We will have 2 machines there on the day at this stage to play (judge dredd / and a CFTBL ) they will be set to free play for a couple of hours. (there is normaly a machine there all the time anyway )
    If you are in the area you are more than welcome to call in and have a game and chat.
    We have a couple of keen local players here which hopefully can help keep this going.
    No ifpa points or ratings on offer, its just a little country town enjoying the love of pinball.
    This article was originally published in forum thread: MUDGEE NSW is starting a small pinball weekly pinball comp.. started by latchmc View original post
  • Latest Threads


    Coolangatta Tweed Pinball Club 2018

    Thread Starter: greengoblin

    Coolangatta Tweed pinball Club 2018 IFPA Sanctioned Comps
    Venue-Timezone coolangatta,shop126 ,level 1 ,The Strand shopping center, 72-80 marine

    Last Post By: greengoblin 8 Hours Ago Go to last post

    All in one boards

    Thread Starter: Sammo248

    Hi guys

    What are the pros and cons of all in one boards which replace the power supply, cpu and driver board

    Why i ask is because

    Last Post By: Ballypinball 5 Hours Ago Go to last post

    70s Cabinet Upgrade ( jungle queen )

    Thread Starter: kress

    Got this pin , got it working now I think it needs some Mag Wheels.

    I plan spending very little actual time on this... the brief goes.

    Last Post By: Michi 1 Hour Ago Go to last post

    Where can I find this connector?

    Thread Starter: felixthadog

    Hi all,

    I am looking for a 2-pin connector that will fit in the connection at the left hand end of the picture below:

    Last Post By: David_AVD 6 Hours Ago Go to last post

    PS4 Hard disk replacement

    Thread Starter: graf


    Got a question. I have a FAT PS4 with the 500gb disk in it. I want to replace it with a bigger drive "Seagate 2TB 2.5inch

    Last Post By: graf 16 Hours Ago Go to last post

    Adelaide needs to lift its game!

    Thread Starter: Dobz

    Had a weekend down in Adelaide and thought I'd spend the evening roaming around to different spots in the CBD that had sited pins.

    5 locations

    Last Post By: Michi 1 Hour Ago Go to last post