Aussie Arcade
  • MUDGEE NSW is starting a small pinball weekly pinball comp..

    Welcome fellow AAs..i am assisting in the set up of a weekly/ fortnightly pinball comp in mudgee nsw..
    We have the local paper doing a small write up on this , and hopefully a pic as well to be in the local paper, the local paper will be there this thursday at midday.
    So anybody in the area is more than welcome to come along on thursday midday, to mr dykes trophies and records store in the mortimer centre in town..
    We will have 2 machines there on the day at this stage to play (judge dredd / and a CFTBL ) they will be set to free play for a couple of hours. (there is normaly a machine there all the time anyway )
    If you are in the area you are more than welcome to call in and have a game and chat.
    We have a couple of keen local players here which hopefully can help keep this going.
    No ifpa points or ratings on offer, its just a little country town enjoying the love of pinball.
    This article was originally published in forum thread: MUDGEE NSW is starting a small pinball weekly pinball comp.. started by latchmc View original post
  • Latest Threads

    thesav

    How to stop slingshot rubber breaking

    Thread Starter: thesav

    How often does rubber last on a machine? The slingshots on my RFM seem to break more often than Iíd expect (twice in 2018 so far). And always at the slingshot

    Last Post By: Pop Bumper Pete 35 Minutes Ago Go to last post
    razorsedge

    Bowland Port Pirie Mini League January 2019

    Thread Starter: razorsedge

    Bowland Port Pirie Mini League #3.


    Bowland January Mini League will be run at Bowland Port Pirie. 71B Esmond Road, Port Pirie,

    Last Post By: razorsedge 6 Hours Ago Go to last post
    ozdave

    Stern Side Armor - Replace or re-powder coat?

    Thread Starter: ozdave

    The side armor on my stern spiderman is getting bit worn and has some scratches and so i'm thinking of sorting it out. I'm wondering what the consensus

    Last Post By: ozdave 7 Hours Ago Go to last post
    toastie

    Tales from the crypt power board 9 pin plug

    Thread Starter: toastie

    Itís probably been discussed before but I canít seem to find it anywhere. The nine pin connector going to J5 plug on my tales from the crypt power board

    Last Post By: toastie 9 Hours Ago Go to last post
    v8racefan

    Apron decal set wanted for Sttng pinball

    Thread Starter: v8racefan

    Does anyone have an apron decal set that they donít have a use for?

    Do any of the parts vendors in Australia stock these?. Thanks in advance.

    Last Post By: v8racefan 10 Hours Ago Go to last post
    Boof Head

    Tspp display troubles

    Thread Starter: Boof Head

    Playing my tspp yesterday and the display started flickering a bit then would have a total blackout and come back on.
    I did the usual check and

    Last Post By: Boof Head 8 Hours Ago Go to last post