PDA

View Full Version : mirror blades?



Sgtmax
19th May 2019, 11:20 AM
Hey guys just seeing where the best place to buy mirror blades are now?

bally/William, data east and stern

Thanks

Cursed
19th May 2019, 11:46 AM
Ryza is your man!

Sgtmax
19th May 2019, 12:18 PM
Ryza is your man!

Thanks mate. Contacted him
Does anybody else also have other sources from which to get mirror blades?

Where does one get pinball 2000 mirror blades from also?

Smithy
19th May 2019, 12:42 PM
Don't think anybody makes the right size blades for Pin2000. :unsure
I recall modifying a set of B/W to fit in the RFM I had.
Made a cardboard template, then cut the blades with a 1mm angle grinder disk to correct size.
Looked sweet with the Mirror blades installed.

JimA
19th May 2019, 01:37 PM
Is it something that Jeff Railways would make if you sent a detailed sketch?

Railways
19th May 2019, 03:08 PM
We have patterns for mirrors for Bally Williams DMD, Bally solid state , Data East like hook and JP , Stern and also Pinball 2000.

Have most of those here and are $65 set and you supply your own method of fitting them. (contact glue , Sikaflex , double sided tape etc.)

https://www.aussiearcade.com/showthread.php/58134-RAIL-WAYS-Current-Product-List

quincon
27th May 2019, 08:42 AM
how much are mirror blades for a TSPP?

Where are you located?