View Full Version : Taito Forest wardner Problem...

21st July 2013, 02:54 PM
Hi All,
My problem\Question is that I have a Forest Wardner PCB that when I plugged in I got sound but no picture and read around that if you remove and re seat what I assume are eeprom chips that can sometimes fix it...now my big problem set in, I didn't realize that a few of the legs were corroded on the B25 04 chip and they broke away so am I stuffed? can I get a eeprom reader/writer and make a new one can I pull a chip off a spare board and use that?
Any Help Appreciated

21st July 2013, 03:16 PM
Have you confirmed the monitor is working?

Id be following the wiring from harness to chassis to make sure all is in order

21st July 2013, 03:25 PM
yeh the monitor is fine as my SF2 and MVC both work fine

21st July 2013, 03:51 PM
Ah np

also checked monitor adjustment?

I had a chassis that needed tweaking between games

21st July 2013, 05:52 PM
yeh like i said i think its the eprom which legs broke that must control the video...if i had a schematic i could work it out lol