PDA

View Full Version : Williams/Bally G.I. headers/connectors in Australia?



DevoDave
16th August 2006, 09:28 AM
Howdy..

Looking to find somewhere local to supply replacement headers/housings and molex crimp pins for the G.I. connections.

Molex part numbers (taken from marvin3m) are 08-52-0113 (pins), 26-48-1125 (headers), and 26-03-4121 (housings)

Sure, I can buy them from the states, but at US$35 shipping it's not really worth it.

I need 5 sets of headers/housings, and 60-70 pins.

Anyone know who might stock them here?

Ric
16th August 2006, 09:42 AM
have never been able to find the housings in Australia

i once got some pins from Captron in Brookvale Sydney, however the last time I called, I was advised you needed to buy them in lots of 1000

i would try Great Plains Electronics (Omaha Nebraska) awesome service and Very friendly - an order that small should only costs around $10 - $15 US shipping

Ric

hamish_nz
16th August 2006, 10:40 AM
If you mean .156" crimp connetors they sell these at jaycar
Cant remember what jaycar call them but they are the same

Daring33
16th August 2006, 11:55 AM
I'd vote for Great Plains also http://www.greatplainselectronics.com/

Ric
16th August 2006, 12:33 PM
it depends what type- I know I am backtracking on earlier comments

if they are the gottlieb type card connecotrs, GPE all the way

if they are the pcb mounted male pins with the female connectors, go to jaycar

if they are the IDE connectors, no idea