PDA

View Full Version : 48in1 PCB setup help pls



lebroyq
29th June 2006, 06:27 PM
Hi,

I have a new machine with a 48in1 PCB. Unfortunately I know very little about this but I want to get into system setup to set the system to freeplay. The manual says to "keep test SW or service SW pressed and power on to enter system setup mode"

Can anyone tell me how to do this? I cannot find the appropriate button

thanks

Lebroyq

Davefjedi
29th June 2006, 06:52 PM
hey there most jamma cabs have a service switch may be located near the volume

Arcade King
29th June 2006, 07:39 PM
yes you need a switch or button hooked up to your test pin on your jamma connector on the cab which is pin 14 on the parts side of your connector.

garuda
29th June 2006, 11:38 PM
The 48 in 1s have a test switch on the pcb. Look for a little round button somewhere near the centre of the pcb.

Arcade King
30th June 2006, 07:27 AM
The 48 in 1s have a test switch on the pcb. Look for a little round button somewhere near the centre of the pcb.

Even better :D