PDA

View Full Version : Pinball legs



terry007
11th June 2006, 12:01 PM
Is the hole pitch (distance between the 2 leg bolts) the same for all brands of machines?

And is the thread on leg bolts the same for all machines?

I realise the legs are different lengths.

Thanks

Darksoul
12th June 2006, 10:34 AM
I think so.

terry007
12th June 2006, 10:40 AM
Thanks.

More leg info here:

http://www.scott.farrar.com/PinballLegs.htm

DKong
12th June 2006, 12:32 PM
Great Link! Cheers!
Was just thinking the other day I wonder if my pinballs have the right legs...so I quick measure today and the SYS11 williams game is right 28.5" with the single 21" rib on each leg..but measured the T2 and the legs are about 31 " with two 9" ribs on each side..going from photo's on IPDB these look look standard but not mentioned on the above link?
Did all WPC games have the extra long legs? or just a few? or are they just the wrong ones..
Thanks again for the info!!!:D

terry007
12th June 2006, 01:50 PM
Sometimes info like this causes more confusion!!

I have a SYS1 Gott and it has 27 front and 28.5 rear!!

Its difficult to get definitive answers to these things.