PDA

View Full Version : Taito cocktail legs



intigod
22nd April 2008, 10:03 PM
hello gents.....

still trying to track down a set of legs for my taito cocktail
http://www.aussiearcade.com/showthread.php?t=13672&highlight=taito+cocktail
its like the one in the link above!!!

can anyone point me in the direction of someone who could help?
dont mind if its repo (if there is such a thing), they need cleaning up etc?

i have this cocktail without a lid or legs lying in the shed....
if i cant find any legs to make a start on restoring it ill be trying to either sell it or give it away :)

plz help

narf_
22nd April 2008, 10:07 PM
what about looking for a old 70's coffee table

legs are very similar on those and usually free

intigod
22nd April 2008, 10:20 PM
what about looking for a old 70's coffee table

legs are very similar on those and usually free

hmmm u know thats not a bad idea.... thinking outside the square i like it!!!

although personally id prefer to just be handed legs on a silver plate ;)

intigod
23rd April 2008, 03:50 PM
anyone else :) ???

maxpower
23rd April 2008, 06:07 PM
It's hard to see the legs in such a small picture, but can you get them made? I have a mate here that makes stuff all the time and he reakens they shouldn't be to hard.

intigod
23rd April 2008, 10:50 PM
It's hard to see the legs in such a small picture, but can you get them made? I have a mate here that makes stuff all the time and he reakens they shouldn't be to hard.

k here is another pic
http://www.aussiearcade.com/attachment.php?attachmentid=5880&d=1206104909

maxpower
24th April 2008, 08:30 AM
Was joking about the picture. It's huge. Anyway i'm sure that someone will make those. Any steel shop would do them. I live in a small town 10,000ish people and there are like 5 places that do welding and steel work here. I dont think it would cost much and then get them powder coated or chromed.

biggeorge
4th August 2008, 01:59 PM
I priced it all up once for the taito cabinet I restored, but fortunately the one I had was tarnished, covered in bubble gum, milkshakes, beer, etc. A rub with some soapy water and steel wool brought the chrome up looking like they were new!

The price for the metal guy to make them up, send them off to be chromed, etc was rediculous.

I also tried to get the glass clips for the same cabinet re-made / chromed. I only had 1 with the cabinet and needed a nice set of 4.

If anybody has a set of 4 nice shiny glass clips to suit a taito cocktail cabinet send me a PM with the price your asking.

Intigod: If you are still looking for the legs, flick me a PM and I will put you in contact with a dude who will have them.

horseyboy69
4th August 2008, 09:10 PM
I priced it all up once for the taito cabinet I restored, but fortunately the one I had was tarnished, covered in bubble gum, milkshakes, beer, etc. A rub with some soapy water and steel wool brought the chrome up looking like they were new!

The price for the metal guy to make them up, send them off to be chromed, etc was rediculous.

I also tried to get the glass clips for the same cabinet re-made / chromed. I only had 1 with the cabinet and needed a nice set of 4.

If anybody has a set of 4 nice shiny glass clips to suit a taito cocktail cabinet send me a PM with the price your asking.

Intigod: If you are still looking for the legs, flick me a PM and I will put you in contact with a dude who will have them.

Gamedude (Dorian) sells cocktail glass clips I am sure. They may be just balck though ($19). Anyway have a look at his site and see what he has.

narf_
4th August 2008, 09:31 PM
for clips i did have about 15 odd sets once

i do have some original taito ones but they need some good loving to get back to normal

if you need CP plates i also have some original unused 80's stock (still heat wrapped)

horseyboy69
5th August 2008, 01:33 PM
for clips i did have about 15 odd sets once

i do have some original taito ones but they need some good loving to get back to normal

if you need CP plates i also have some original unused 80's stock (still heat wrapped)

Hey Narf,
Can you put up a photo and price of those CP plates. I may be interested in them if no one else is. Cheers,
Ian

germfree
19th March 2009, 07:58 PM
Narf, I know its a while ago but did you ever get rid of those CPs? If not, I might be interested. Which game do they belong to?

dungbeetle46
24th March 2009, 06:45 PM
you can get the clips here
http://www.in2amusements.com.au/shop/index.php/11/15_Glass_Corner_Clips_Retro

daics3522
24th March 2009, 06:54 PM
you can get the clips here
http://www.in2amusements.com.au/shop/index.php/11/15_Glass_Corner_Clips_Retro

and the legs from the same spot. Jason (jaspar) is a great bloke and always willing to help.

http://www.in2amusements.com.au/shop/index.php/10/98_Cocktail_Side_Legs_(Pair)