PDA

View Full Version : Pictures of lowboy cabinets



Spaced
20th April 2008, 01:27 PM
Hi Guys and Gals,

I know this isn't particularly an arcade section request but if anyone has a lowboy cabinet or pictures of one. Can you please upload or link me to pictues. If you have dimensions of your cabinets that would be great also.

Currently in the process of building one and want to get as close as possible.

Thanks,

D

Gehirn
20th April 2008, 01:50 PM
Look here : http://www.aussiearcade.com/showpost.php?p=152077&postcount=65
Heaps of cabinet plans were uploaded i think theres lowboys in there :D

Spaced
20th April 2008, 02:49 PM
awesome many thanks

NickD
20th April 2008, 02:57 PM
theres a few different types of lowboys,

there are 20' lowboys and 26' lowboys, there both very similar but the 26' lowboy is slightly taller and about double the width of a 20' lowboy

dr teeth
20th April 2008, 07:32 PM
Hi Guys and Gals,

I know this isn't particularly an arcade section request but if anyone has a lowboy cabinet or pictures of one. Can you please upload or link me to pictues. If you have dimensions of your cabinets that would be great also.

Currently in the process of building one and want to get as close as possible.

Thanks,

D

Here's a pic of mine running MK2.

http://i297.photobucket.com/albums/mm212/bubco/1.jpg

If I remember, I'll post the dimensions.

Syzlack
20th April 2008, 08:01 PM
Heres a pic of mine running SF2WW


Crappy phone camera!!!

Spaced
21st April 2008, 10:23 AM
Awesome thanks Guys. Mr Teeth, that's exactly the look I'm going for. Receeded top part.

Spaced
22nd April 2008, 02:27 PM
Any luck with dimensions guys?

dr teeth
22nd April 2008, 03:57 PM
Awesome thanks Guys. Mr Teeth, that's exactly the look I'm going for. Receeded top part.

I got a few of the dimensions from my cab.

Looking from the front it is 152cm tall by 66.5 cm wide

http://i297.photobucket.com/albums/mm212/bubco/P4220007.jpg

The back is 150 cm tall by 66.5 cm wide (the back is slightly lower because there is a slight slope in the top of the header.

The side is 152 cm tall by 83cm long (the very bottom is 71.5 cm and then it goes out to 83cm).

http://i297.photobucket.com/albums/mm212/bubco/P4220010.jpg

The control panel is 62.5 cm by 18.5 cm.

The marquee is 63 cm long by 20.5 cm wide.

Hope these dimensions help, good luck with the cab. :)

Sorry these dimensions took me a while to get.

Spaced
22nd April 2008, 04:02 PM
I got a few of the dimensions from my cab.

Looking from the front it is 152cm tall by 66.5 cm wide

http://i297.photobucket.com/albums/mm212/bubco/P4220007.jpg

The back is 150 cm tall by 66.5 cm wide (the back is slightly lower because there is a slight slope in the top of the header.

The side is 152 cm tall by 83cm long (the very bottom is 71.5 cm and then it goes out to 83cm).

http://i297.photobucket.com/albums/mm212/bubco/P4220010.jpg

The control panel is 62.5 cm by 18.5 cm.

The marquee is 20.5 cm by 63cm.

Hope these dimensions help, good luck with the cab. :)

Awesome thanks mate :D

dr teeth
22nd April 2008, 04:06 PM
No problem, glad to help out, hope all goes well with building the cab. :D

Spaced
22nd April 2008, 04:07 PM
The dimensions on the lowboy v2.5 is 1200 high but was going to go 1400 so there was 200 for the speakers might have to make it a bit bigger.