Jump to content
Due to a large amount of spamers, accounts will now have to be approved by the Admins so please be patient. ×
IGNORED

What pins have been coming thru the Dedshed


Recommended Posts

What pins have been coming thru the Dedshed

 

Finally some shed time.

 

Parts are here

 

e5fe8e914e08b574a6c640be0c177a4d.jpg

 

Leds too

 

ba5881ba1f16f46e5fe0624be9acbdf2.jpg

 

Now to get it all back together and working.

 

98eb00e8f3935b587b18a693ed88ca17.jpg

 

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

What pins have been coming thru the Dedshed

 

Fark ..... just came in and it's 4:10am.

 

So had to replace some of the lamp sockets. They were falling apart.

Also change some of the plastic socket types that were broken.

 

bc5e6fd77b74714c305600215c4329ad.jpg

 

8a44d5c52e431d71b4a11611c0da86dd.jpg

 

Cleaned the target banks and swapped out the trip coil for a new one. Had already changed the IRL540 that was gone but the coil was gone too.

 

d0ebf583f797dab00f7793b4b805d390.jpg

 

b8f6e1b15fc0b70ee2d55f8eeb103a52.jpg

 

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

Mirror blades are in and all done , just need some small tweaks where ball gets stuck and some lights lock on.

 

b49a6540b42a4f279fc3d3e116516a61.jpg

 

0d15d95a322da00a55e9ab5d779cfbf8.jpg

 

So that's RCT signed off for now. Came up nice. Just need some side rails and it's back to site.

 

07cae0b833aeabe27275524ac86bd7ac.jpg

 

cf138aa6d810115ed7fc9ef62734fc93.jpg

 

537a34160cce42e86f61d71f203abcf1.jpg

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

What pins have been coming thru the Dedshed

 

While I was at it, tarted up Transformers a bit.

 

7969842f439b47b515fea5fe09647652.jpg

 

Moved the spot lights down to the bottom of the slingshots so I can see the flippers.

 

b4d1370b6751c55a10bff2a9234b5a86.jpg

 

 

Sent from my iPhone using Tapatalk

Edited by Dedrok
  • Like 1
Link to comment
Share on other sites

So that's RCT signed off for now. Came up nice. Just need some side rails and it's back to site.

 

Wish I lived near Newcastle would love to go and drop a few (or a lot more) coins in it for you!

 

Thanks for sharing.

Link to comment
Share on other sites

Wish I lived near Newcastle would love to go and drop a few (or a lot more) coins in it for you!

 

Thanks for sharing.

 

Or call in home for a few as well.

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

Wish I lived near Newcastle would love to go and drop a few (or a lot more) coins in it for you!

 

Or call in home for a few as well.

 

There'd be a few homes that Michael would be most welcome to visit if he was up this way .

 

 

Nice job on the clean ups Edy . RCT came up real nice . For a bloke who wasn't that fond of LED's a few years back you're not doing too bad :D .

Link to comment
Share on other sites

There'd be a few homes that Michael would be most welcome to visit if he was up this way .

 

 

Nice job on the clean ups Edy . RCT came up real nice . For a bloke who wasn't that fond of LED's a few years back you're not doing too bad :D .

 

Cause I'm not using Supa brite blinding leds. Or retina burners.

 

I think the blinder I get the more I need to brighten things up. Even need glasses to play comps now. I blame your Avengers flashers.

 

Am using comfort brites and frosted.

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

What pins have been coming thru the Dedshed

 

Before starting Swords of Fury, I snuck in a quick couple of jobs.

 

Phoenix

This was a couple of small fixes.

Had a broken wire from the target reset coil.

Also needed the target scoring boards cleaned and the horseshoes adjusted and cleaned. Found a broken diode while doing them.

 

8692ad83c433eb9fad10124aa5a34b90.jpg

 

A few switch adjustments and bulb changes plus socket clean.

 

19bf27af888f31b98ec23e2b75d09a8a.jpg

 

Changed the batteries diode to stop them going flat again.

 

And lastly, swapped out a failing display.

 

9321ef270e8b3d6d6950e460a236ae51.jpg

 

Almost forgot

 

Properly fit the BG channel set.

 

c30965d9e14a376bd9ce727caeb22b89.jpg

 

 

Sent from my iPhone using Tapatalk

Edited by Dedrok
  • Like 1
Link to comment
Share on other sites

Or call in home for a few as well.

 

There'd be a few homes that Michael would be most welcome to visit if he was up this way .

 

Cheers fellas!

 

Right back at you, if you are ever down in Mexico just let me know.

Link to comment
Share on other sites

Cheers fellas!

 

Right back at you, if you are ever down in Mexico just let me know.

 

First port of call is Hashmans place. Need a good laugh.

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

What pins have been coming thru the Dedshed

 

Finally all the distractions are over, has been a busy couple of weeks followed by losing my job.

So it's time to get back on track with system 11 games.

Currently have 4 lined up and going through inspections, making lists of things to be done and order, as well as shaking my head, changing power leads to Aus and battery mods. No that they boot up I can play test and make more lists.

 

So up next, finally

 

Swords of Fury.

 

First off the bat, removed the remote battery pack. Was soldered straight to the old battery holder, which had at one time had the battery soldered to the holder.

 

042059cec51b1b6238a115339ce6e457.jpg

 

Besides that, the boardset and game in general is pretty good, unlike BK2K.

 

All new plastics and rubber plus it was clean.

 

So looks like just flipper kits, some leds, under playfield cleaning and tweaking, and SoF will be done.

 

 

Sent from my iPhone using Tapatalk

Edited by Dedrok
  • Like 1
Link to comment
Share on other sites

Chucked in some cool whites and the plastics really popped, nice light blue.

Only half way up so far.

 

6464c962742dd96fccb0556376d2b1d1.jpg

 

And did a few inserts too, although need to still pull the lamp boards to clean the inserts.

 

05eba9e44a803d9e514f32ac1b53561d.jpg

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

I had crap absolutely everywhere. That happens when doing 4 or 5 at once.

 

Had a quick cleanup. All set now to make a start for the day.

 

e412cba4cb62ebf45e3ebe0d4e865637.jpg

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

Flippers were absolutely covered in WD40. **** this shits me.

So have so much more cleaning to do.

 

84cf0326ca674b78c4c4b6486037e773.jpg

 

Cleaned everything up and installed new bushes.

 

bd1e09f71692bb108781abed2f4ca45b.jpg

4add1126d46a16937a00496281cc31c9.jpg

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

What pins have been coming thru the Dedshed

 

There was a broken screw and threaded posts that hold down the upper playfield, so now have to dig some out.

Also the trough behind the targets had a broken lug at one end.

 

Removed the target bank assy and cleaned the upper playfield, which had the wrong rubbers with added posts screwed down through the upper playfield.

Into the gate underneath, bending it. [emoji1306][emoji1306][emoji1306]

 

Washed and polished all the ramps and the trough, cleaned the star posts and reassembled the upper playfield and right ramp plus the top right plastic.

 

734f5bdcded8e37274559059b68c9d92.jpg

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

What pins have been coming thru the Dedshed

 

Next was to insert the lighting board back behind the targets and led them.

 

640fac1c35adc5771e13ed4173a661e5.jpg

 

5a14450dbc9ac33958773731d61e4838.jpg

 

Then strip the target bank, clean and polish the targets, polish the metal and washers, and reassemble.

Tedious but worth doing.

 

cb67f50025653833f21674e94736b2f7.jpg

 

18ec540575d9d1dc11c6318ecae919cc.jpg

 

fb3b03c57790108e58d035eb4899b1c2.jpg

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

Starting to look good, but have run out of leds again. Well at least the white that I'm using.

 

d96415b19c02a6ea2c61cfe0c0122637.jpg

 

Top half inserts normal, bottom half inserts led.

 

61b9422160d6f45dea03708a26f2881f.jpg

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...